Fisher-Price B2108, G5175, B3469 manual Seat Bottom

Page 8

Assembly

Frame Hub

Push

Button

Swing

Tube

Front

of Seat

Curved

17 Front

Base

•Position the seat assembly so that the front of the seat is toward the curved front base.

•While pressing the buttons on the swing tubes, insert them into the frame hubs. Push the swing tubes up until the but- tons “snap” into the hole in the frame hubs.

•Push down on the seat to be sure the seat is secured in both frame hubs.

Frame

Hubs

18

#8 x 13/8” Screw - 2

Shown Actual Size

•Insert a #8 x 13/8" screw into each frame hub and tighten.

•Again, push down on the seat to be sure the seat is secured to both frame hubs.

Pad

Waist Belts

Crotch Belt

19

•Fit the pocket on the back of the pad onto the seat back.

•Fit the waist belts through the smaller slots in the pad.

Pad

Elastic

Loops

Crotch

Belt

Holes

20

SeatBottom

•Lift the bottom of the pad.

•Insert the pad elastic loops through the holes in the seat bottom.

•Insert the crotch belt through the slot in the pad.

•From under the seat, fit the elastic loops onto the tabs on the seat bottom.

8

Image 8

Contents Smart Response Swing Model Number B2108, B3469, G5175Consumer Information Parts Assembly Set the frame assembly aside for Assembly step Fit the grooves on the bracket to the seat tubes, as shown Cap Seat Bottom Assembly Battery LatioSecuring Your Child Tighte nTo tighten the restraint To loosen the restraintSeat Using Toy Using the TraySwing Modes Baby Sounds Activated Parent ActivatedBaby Sounds Activated Sound Sensitivity Dial Music/Volume Switch Speed DialSwing Mode Switch Swing Mode Switch Speed Dial Music/Volume Switch Parent ActivatedStorage CareTo remove the pad To replace the padOne 1Year LimitedWarranty FCC Statement United States Only For other countries outside the United States