Cisco Systems OL-11399-01 manual Adding a Value Builder

Chapter 2 Using the NetFlow Collector User Interface

Configuration

Figure 2-11 Value Builders

Click on Add Value Builder to bring up an empty form for defining a new value builder. A value builder is created by specifying its type, associating it with a field (sometimes two or more fields such as for the Active Time type as shown in Figure 2-12), and specifying attributes specific to the selected type.

Different forms are displayed depending on which value builder type is selected.

When Add Value Builder or Edit is selected, a form for editing the value builder definition is displayed. All value builders have an ID and Type. The ID must be unique for all value builders; the Type determines the algorithm used to create the value. The remaining attributes that are shown in the Value Builder form are determined by which type is selected.

Figure 2-12 Adding a Value Builder

See the “Keys and Values” section on page 4-5for additional information about value builder definitions.

	Cisco NetFlow Collector User Guide
2-22	OL-11399-01