Cisco Systems OL-11399-01 manual Max Flow Byte Rate, Start Time, Sum

Page 24

Chapter 2 Using the NetFlow Collector User Interface

Configuration

Max Flow Byte Rate

The Max Flow Byte Rate value builder determines the byte rate for each received flow and outputs the highest value found for all flows in an aggregation period. This builder was referred to as Max Burst Rate in previous releases. It has the following attributes.

Attribute

Description

 

 

Name

Column name in output.

 

 

Start time field

ID of the start time field to obtain from a flow.

 

 

End time field

ID of the end time field to obtain from a flow.

 

 

Byte count field

ID of the byte count field to obtain from a flow.

 

 

Usage

Always leave set as Maximum.

 

 

Rate

The Rate value builder determines a rate by dividing the result of another value by the amount of time in the aggregation period. It has the following attributes.

Attribute

Name

Quantity value

Units

Description

Column name in output.

ID of another value builder used to determine the quantity.

Scales the result to seconds or minutes.

Start Time

The Start Time value builder obtains a start time from a field in a flow. It has the following attributes...

Attribute

Name

Start time field

Description

Column name in output.

ID of the start time field to obtain from a flow.

Sum

The Sum value builder obtains an integer value from a field in a flow and adds it to a count. It has the following attributes.

Attribute

Name

Field

Allow null value

Description

Column name in output.

ID of the integer field to obtain from a flow.

If not selected and the flow does not contain the specified field, an error is logged.

 

Cisco NetFlow Collector User Guide

2-24

OL-11399-01

Image 24
Contents Opt/CSCOnfc/bin/nfcollector start all Nfc-hostname8080/nfcOpt/CSCOnfc/bin/webconfig.sh Customizing the Cisco NetFlow Collector InterfaceNFC Login Window Setting Description Default Value FileCisco NetFlow Collector User Interface Login Window NavigationConfiguration From this window you can access or configure the following Aggregators Adding AggregatorsEditing an Aggregator Add Aggregator WindowThresholds Modify Aggregator WindowFields Key Builders NetFlow Export Field Window10 Key Builders Window BGP Attribute Attribute DescriptionBit Field BooleanByte Array Customer Name Egress PEIngress CE IntegerInteger Range Map Interface Snmp NameIP Address IP Address Range Map Mac AddressMasked IP Address Multi-Field Map Click Add conditionOption Data Site NameValue Builders StringSubnet Address 12 Adding a Value Builder Active Time Directional SumEnd Time Flow CountMax Flow Byte Rate RateStart Time SumAggregation Schemes Sum with Sampling EstimationFilters 14 Modify Aggregation SchemeNetFlow Export Source Groups NetFlow Export Source Access List 16 NetFlow Export Source Groups18 NDE Source Access List BGP PeerGlobal AdvancedReports Custom Reports Fields of the Custom Reports form are described in Table Field Value Description Combine devices , Separate devices , or Single device . For Single deviceReport Templates AllConfiguring Scheduled Reports Scheduled ReportsNavigate Reports Custom Reports Click Save as Template25 Scheduled Reports Window 26 Add Scheduled Report Default value is /opt/CSCOnfc/Reports DailyPath /opt/CSCOnfc/Reports Opt/CSCOnfc/Reports/fooDisplaying Scheduled Reports Reporting Features 27 Scheduled Reports FolderSorting and Graphing 28 Sample Bar GraphTrending 29 Sample Pie GraphExport and Print FilterDrill Down Control StatisticsHealth Monitor Statistics Opt/CSCOnfc/config/nfcmem Port StatisticsSource Statistics Sourceid V9 or enginetype and engineidLogs 37 Viewing Logs in Web-based UIOL-11399-01