Cisco Systems OL-11399-01 manual Ingress CE, Integer

Page 16

Chapter 2 Using the NetFlow Collector User Interface

Configuration

Ingress CE

The Ingress CE key builder resolves the ingress CE from the input interface field. It has the following attributes:

Attribute

Output name

Field

Allow null value

Description

Column name in output.

ID of the field to obtain from a flow.

If not selected, an error is logged if a flow does not contain the indicated field.

This key builder requires configuration in the config/peList.conf file. You must include one row to correspond to each PE device VPN interface that export NetFlow packets to this NFC server. The rows in this file contains five fields, in the following order: exporting device (PE) IP address, interface name, name of the site to which this interface is connected, CE to which this interface is connected, and customer name. These fields should be separated by commas. See the following example:

172.20.98.250,FastEthernet0/1.401,vpn1-branchB,CERouter-3,Cisco 172.20.98.250,FastEthernet0/1.601,vpn2-branchB,CERouter-4,IBM 172.20.98.248,FastEthernet2/1,vpn2-branchA,CERouter-2,IBM 172.20.98.246,FastEthernet0/1,vpn1-branchA,CERouter-1,Cisco

Integer

An Integer key builder obtains an integer value from a flow. It has the following attributes.

Attribute

Output name

Field

Format

Allow null value

Description

Column name in output; defaults to the field ID if not specified.

ID of the field in a flow.

Decimal or hexadecimal.

If not selected, an error is logged if a flow does not contain the indicated field.

	Cisco NetFlow Collector User Guide
2-16	OL-11399-01

Image 16

Contents Opt/CSCOnfc/bin/nfcollector start all Nfc-hostname8080/nfcOpt/CSCOnfc/bin/webconfig.sh Customizing the Cisco NetFlow Collector InterfaceNFC Login Window Setting Description Default Value FileCisco NetFlow Collector User Interface Login Window NavigationConfiguration From this window you can access or configure the following Aggregators Adding AggregatorsEditing an Aggregator Add Aggregator WindowThresholds Modify Aggregator WindowFields Key Builders NetFlow Export Field Window10 Key Builders Window BGP Attribute Attribute DescriptionBoolean Bit FieldByte Array Customer Name Egress PEIngress CE IntegerInterface Snmp Name Integer Range MapIP Address Mac Address IP Address Range MapMasked IP Address Multi-Field Map Click Add conditionOption Data Site NameString Value BuildersSubnet Address 12 Adding a Value Builder Active Time Directional SumEnd Time Flow CountMax Flow Byte Rate RateStart Time SumAggregation Schemes Sum with Sampling EstimationFilters 14 Modify Aggregation SchemeNetFlow Export Source Groups NetFlow Export Source Access List 16 NetFlow Export Source Groups18 NDE Source Access List BGP PeerGlobal AdvancedReports Custom Reports Fields of the Custom Reports form are described in Table Field Value Description Combine devices , Separate devices , or Single device . For Single deviceReport Templates AllConfiguring Scheduled Reports Scheduled ReportsNavigate Reports Custom Reports Click Save as Template25 Scheduled Reports Window 26 Add Scheduled Report Default value is /opt/CSCOnfc/Reports DailyPath /opt/CSCOnfc/Reports Opt/CSCOnfc/Reports/fooDisplaying Scheduled Reports Reporting Features 27 Scheduled Reports FolderSorting and Graphing 28 Sample Bar GraphTrending 29 Sample Pie GraphFilter Export and PrintDrill Down Statistics ControlHealth Monitor Statistics Opt/CSCOnfc/config/nfcmem Port StatisticsSource Statistics Sourceid V9 or enginetype and engineidLogs 37 Viewing Logs in Web-based UIOL-11399-01