Synopsys 640-pin Generic Device Adapter manual Parts List

Chapter 2: Building the Daughterboard The ModelSource 640-pin Adapter

Connectors J1 and J3

	One Teradyne	One Teradyne
	Signal Module	Signal Module
1	24	48

A

B

C

D

E

F

Rows B and E are connected to ground

Connectors J2, J4, J5 and J6
One Teradyne	Two Teradyne
Signal Module	Power Modules
1	24	AP8
	AP1
A
B	DP1	DP8
C
D
E
F	FP1	FP8
Rows B and E are	Rows B, C, and E
connected to ground		do not exist

Figure 2: Connector Pin Detail, Shown from Component Side

Parts List

The required parts are as follows:

●Eight Teradyne HDM signal modules, 488-5324-XXX. These are available either as press fit or solder tail, in a variety of tail lengths. The last three digits (XXX) of the part number depend on which type you choose; for specific part numbers, see the Teradyne product documentation.

●Eight Teradyne HDM power modules, 437-5034-500. These are currently available only as solder tail.

●Twelve Southco retractable screw fasteners, 47-65-221-70.

●To mount the stiffeners:

❍Fourteen 4-40 1/4” pan head Phillips screws

14 Synopsys, Inc. November 2001