Chapter 5: Completing the Model | The ModelSource |
Labeling the Daughterboard
After you have completed the Shell Software and mounted the Adapter and Daughterboard onto the ModelSource modeling systems, you must verify the Daughterboard’s label and update it if necessary.
Note
Ensure that the Daughterboard is seated on the Adapter before you verify and update the label. If the daughterboard is not seated, the software will report the label as “GEN640”, the label of the Adapter itself.
If it is necessary to update the Daughterboard’s label, use the lm Label Device Adapter utility to change the adapter’s label to the device_name used in the model’s Shell Software. For more details, refer to “Label Device Adapter“ in the ModelSource User’s Manual.
Verifying the Model
After you have developed the model, you must verify it. For more information, see the ModelSource User’s Manual and the Logic Model Development Manual.
Note
The pattern memory available for simulation is limited to the smallest amount of available memory on any one of the eight modeling boards in the four modelers.
26 | Synopsys, Inc. | November 2001 |
