Cisco Systems OL-11399-01 manual Field Value Description

Chapter 2 Using the NetFlow Collector User Interface

Reports

Table 2-2	Custom Reports Fields
Field		Value	Description
Start Date		A date string in the format of	The data for the report will come from
		dd MMM yyyy where dd is the day of the	Cisco NetFlow Collector output files that
		month, MMM is the abbreviated name of	were generated on or after this date.
		the month, and yyyy is the four digit year.
		For example, 01Jan2074 for January 1st,
		2007.
Start Time		A time string in the format of hh:mm:ss	The data for the report will come from
		where hh is the hour of the day in 24 hour	Cisco NetFlow Collector output files that
		notation, mm is the minute of the hour,	were generated at or after this time.
		and ss is the seconds of the minute. For
		example, 13:05:00 for 1:05PM and 0
		seconds.
End Date		A date string in the format of	The data for the report will come from
		dd MMM yyyy where dd is the day of the	Cisco NetFlow Collector output files that
		month, MMM is the abbreviated name of	were generated on or before this date.
		the month, and yyyy is the four digit year.
		For example, 01Jan2007 for January 1st,
		2007.
End Time		A time string in the format of hh:mm:ss	The data for the report will come from
		where hh is the hour of the day in 24 hour	Cisco NetFlow Collector output files that
		notation, mm is the minute of the hour,	were generated at or before this time.
		and ss is the seconds of the minute. For
		example, 13:05:00 for 1:05PM and 0
		seconds.
Relative Date		Either the start and end date and time	Selecting a relative time sets the start and
and Time		specified, or the calculated hour, day,	end time relative to the current time. For
		week, or month relative to the current	example, if you select Current hour, the
		time. Also useful when creating report	time range starts at the current hour of the
		templates that are recalled and run later at	day. If you select Previous hour, the last
		the same relative time.	entire hour is shown. If you select Until
			now, the time range is set to end at the
			current time.

	Cisco NetFlow Collector User Guide
2-34	OL-11399-01