Operating instructions (continued)
Sonata DR30
1. In tuner mode press the Band button to toggle between DAB/FM modes.
2. In FM mode, press and hold the button to scan to previous available stations or press and hold the button to scan to the next available stations. 'SCANNING' will be displayed while scanning for available station as shown previously. Briefly press the or button to
3.To perform a complete scan of the DAB broadcasting band, press and hold the button to enter the scan menu. Rotate the Volume control or press the volume control on the remote to select 'Yes'. Press the Volume control or Select on the remote to confirm and proceed with the scan.
Note: In some regions, the complete scan process can take up to three minutes to complete.
4. In DAB mode, press the or button to browse through the stations currently stored in the tuner’s database. To select a station, either press Select on the remote control, or Select/Mode on the front of the unit. Alternatively, the currently viewed station will be selected automatically if no button is pressed for five seconds.
Setting presets
Radio stations can be stored into the memory presets for easy access. You can store up to 20 presets for each band (for example, 20 presets for the AM band plus 20 presets for the FM band and 20 presets for the DAB band).
1.Select the station you wish to store and hold down the Select button. The display on the unit shows the next available preset.
2.Rotate the Volume control on the front of the unit or press the volume control on the remote to move to a new preset number and press Select to store the preset. The display will briefly show that the station has been stored.
3.To load a stored preset, simply press the number on the remote control that corresponds with the preset you wish to access. Use
Note: Stored presets can be replaced by saving a new desired station into any preset.
18