TROUBLESHOOTING
Problem | Possible Cause | Solution |
|
|
|
There is no reception. | One of the units is not on. | Make sure both units are on. |
|
|
|
| The camera and receiver | Make sure both units are on |
| are on different channels. | the same channel. |
|
|
|
| The camera is set to “AV”. | Make sure the camera is set |
|
| to “camera”. |
|
|
|
| Batteries are low or improperly | Check or replace batteries. |
| installed in the camera. |
|
|
|
|
| AC adapters are not connected or | Check connections or change to |
| electrical outlet is out of order. | another electrical outlet. |
|
|
|
| The wrong AC adapters are being | Be sure to use the AC adapter |
| used. | labeled “Receiver” with the |
|
| receiver and the AC adapter |
|
| labeled “Camera”with the camera. |
|
|
|
There is sound but there | The LCD switch on the receiver is | Make sure the LCD switch is set |
is no picture display. | in the OFF position. | to ON. |
| Batteries are low or improperly | Check or replace batteries. |
| installed. |
|
|
|
|
The picture is not clear. | The picture needs to be adjusted. | Adjust the brightness, contrast, |
|
| and/or color. Refer to page 7. |
|
|
|
| The camera is too far from your | Place camera up to 10 feet from |
| baby. | your baby. In night vision mode, |
|
| place it no more than 6 feet away. |
|
|
|
10