Novatel OM-20000141 user manual FCC Notices, Industry Canada, CE Notice, Weee Notice

Page 8

Notices

The following notices apply to the SPAN-IGM.

FCC Notices

This SPAN device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This SPAN device has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

use properly shielded interface cables (such as Belden #9539 or equivalent) when using the serial data ports, and double-shielded cables (such as Belden #9945 or equivalent) when using the I/O strobe port.In order to maintain compliance with the limits of a Class A digital device, it is required to

Changes or modifications to this equipment, not expressly approved by NovAtel Inc., could result in violation of FCC, Industry Canada and CE Marking rules and void the user’s authority to operate this equipment.

Industry Canada

SPAN Class A digital apparatuses comply with Canadian ICES-003.

SPAN appareils numérique de la classe A sont conforme à la norme NMB-003 du Canada.

CE Notice

The enclosures carry the CE mark.

"Hereby, NovAtel Inc. declares that this SPAN-IGM is in compliance with the essential requirements and other relevant provisions of the R&TTE Directive 1999/5/EC, the EMC Directive 2004/108/EC and of the RoHS Directive 2011/65/EU."

WEEE Notice

If you purchased your SPAN product in Europe, please return it to your dealer or supplier at the end of its life. The objectives of the European Community's environment policy are, in particular, to preserve, protect and improve the quality of the environment, protect human health and utilise natural resources prudently and rationally. Sustainable development advocates the reduction of wasteful consumption of natural resources and the prevention of pollution. Waste electrical and electronic equipment (WEEE) is a regulated area. Where the generation of waste cannot be avoided, it should be reused or recovered for

its material or energy. WEEE products may be recognized by their wheeled bin label ().1

8

SPAN-IGM User Manual Rev 2

Image 8
Contents SPAN-IGM OM-20000141 Rev SeptemberWarranty Return Instructions Proprietary NoticeTable of Contents Frequently Asked Questions Replacement Parts Figures Tables NovAtel Knowledge Base Before Contacting Customer Support Contact InformationFCC Notices Industry CanadaCE Notice Weee NoticeLightning Protection Installation and Grounding Procedure What is the hazard?Hazard Impact Actions to Mitigate Lightning HazardsPrimary and Secondary Lightning Protection Ref # Description USAIntroduction Fundamentals of Gnss + INSSystem Components ScopeSPAN-IGM Integrated Gnss + INS unit Gnss antenna PC softwareConventions Span Installation Connector Type ConnectionsRequired Equipment SPAN-IGM HardwareSPAN-IGM Cables  Use a USB cable to log raw dataSPAN-IGM Cables NovAtel Port PurposeHardware Set Up Typical SPAN-IGM Set Up Serial Port RadioTypical SPAN-IGM Set Up USB Port Radio Mount the Antenna Mount the SPAN-IGMConnect Power Connect the Antenna to the SPAN-IGMConnect a Computer Using a Serial Connection Connect a Computer to the SPAN-IGMConnect I/O Strobe Signals Connect a Computer Using a USB ConnectionO Strobe Signals Signal Description aEnable RS-422 serial connections Enable the COM3 Serial PortDisable the COM3 Serial Port 8 COM3 Serial PortOdometer connection Odometer RequirementsSoftware Configuration Gnss ConfigurationSpan IMU Configuration Pin M12 Connector Function J2 Wire Bundle On Cwpt SensorConfigure Span with Connect Off Flashing Slow 1Hz Flashing Fast 1Hz SPAN-IGM LEDsSPAN-IGM LEDs Span Operation Communicating with the Span SystemINS Window in NovAtel Connect Chapter Span OperationReal-Time Operation Span Operation ChapterSystem Start-Up and Alignment Techniques AsciiDual Antenna Alignment Kinematic AlignmentManual Alignment Navigation Mode InssolutiongoodSolution Parameters Data Collection Logging Restriction Important Notice Vehicle to Span Frame Angular Offsets Calibration RoutineMeasurement Timing and Frequency Wheel Sensor Update LogicSpan Wheel Sensor Messages Set up a Wheel Sensor Azimuth Sources on a Span SystemCourse Over Ground Inertial AzimuthData Collection for Post-Processing Log Azimuth Source FormatVariable Lever Arm Installation SPAN-IGM Dual AntennaConfiguring Align with SPAN-IGM Alignment on a Moving Vessel Aided Transfer Alignment Alignment on a Stationary Vehicle Aided Static AlignmentUnaided Alignment Span Align Attitude UpdatesAutomatic Alignment Mode Automatic Alignment default Span Body Frame Reference Frames Within SpanLocal-Level Frame ENU Span Enclosure Frame Vehicle FrameNovAtel Firmware and Software Firmware Updates and Model UpgradesFirmware Updates Authorization Code Model UpgradesTypes of Firmware Files Updating or Upgrading Using the WinLoad UtilityTransferring Firmware Files Using the WinLoad Utility Open a File to DownloadUpdating using SoftLoad Commands Searching for CardWorking with S-Records Softloadsrec S-RECORDXXXXXX,XXXXXX,XXXXXX,XXXXXX,XXXXXX,MODEL,EXPDATE Upgrading Using the Auth CommandUpgrade Procedure Technical Specifications SPAN-IGM-A1 Technical SpecificationsSPAN-IGM-A1 Environmental Specifications SPAN-IGM-A1 Mechanical DrawingsSPAN-IGM-S1 Technical Specifications SPAN-IGM-S1 Physical SpecificationsSPAN-IGM-S1 Gnss Performance SPAN-IGM-S1 Data RatesSPAN-IGM-S1 Environmental Specifications SPAN-IGM-S1 Mechanical DrawingsSPAN-IGM Ports Main Port PinoutPin # Label Description AUX Port PinoutSPAN-IGM Interface Cable SPAN-IGM Interface Cable Pin-Out DescriptionsMIC Port User PortSPAN-IGM Align Interface Cable SPAN-IGM Align Interface Cable Pin-Out DescriptionsSPAN-IGM Auxiliary Port Interface Cable COM3 PortPin # Labels Varf DgndFrequently Asked Questions Appendix BReplacement Parts Accessories and OptionsSpan System Part Description NovAtel PartIndex Index OM-20000141 Rev September

OM-20000141 specifications

The Novatel OM-20000141 is a high-performance multi-GNSS (Global Navigation Satellite System) receiver designed for various applications including precision agriculture, autonomous vehicles, and surveying. This state-of-the-art device combines cutting-edge technologies to provide accurate and reliable positioning data, making it an indispensable tool for professionals in fields that rely on geolocation.

One of the standout features of the Novatel OM-20000141 is its multi-frequency support, allowing it to receive signals from GPS, GLONASS, Galileo, and BeiDou systems. This capability significantly enhances the accuracy and reliability of positioning information, particularly in challenging environments where signal interference can occur. By utilizing multiple frequencies, the OM-20000141 can mitigate errors caused by atmospheric disturbances and multi-path signals, resulting in improved precision.

In addition to its multi-GNSS capabilities, the receiver incorporates advanced RTK (Real-Time Kinematic) technology, enabling centimeter-level accuracy. This is particularly beneficial for applications that require pinpoint geolocation, such as precision agriculture, where farmers need to optimize crop yields and resource usage. The RTK technology allows users to achieve real-time positioning corrections, making it a vital tool for surveying and construction projects that demand high precision.

The Novatel OM-20000141 also features built-in connectivity options, including Bluetooth and USB interfaces, facilitating seamless integration with other devices and systems. This connectivity is crucial for enabling real-time data sharing and remote monitoring, enhancing the usability of the device in various operational environments.

Robustness is another significant characteristic of the OM-20000141. Designed to withstand harsh conditions, the receiver features a durable housing that protects it from dust, moisture, and extreme temperatures. This resilience ensures that the device operates effectively in all weather conditions, making it suitable for outdoor applications.

Furthermore, the receiver is equipped with intelligent positioning algorithms that optimize performance in urban canyons and dense foliage areas, where traditional GNSS receivers may struggle. By leveraging these algorithms, the OM-20000141 can maintain reliable positioning even in challenging environments.

Overall, the Novatel OM-20000141 stands out as a versatile and reliable GNSS receiver, merging advanced technologies to deliver high accuracy and reliability. Its exceptional features make it an invaluable asset for professionals in various industries, enhancing their ability to achieve precise geolocation and optimize their operations.