Battery Safety Information

Receiver Battery Installation (Optional)

1,5V x 3

“AAA” (LR03)

•Locate the battery compartment door on the back of the receiver.

•Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door.

•Insert three “AAA” (LR03) alkaline batteries into the battery compartment.

Hint: We recommend using alkaline batteries for longer battery life.

• Replace the battery compartment door. Tighten the screw with a Phillips screwdriver. Do not over-tighten.

• Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for recycling advice and facilities (Europe only).

In exceptional circumstances, batteries may leak ﬂ uids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:

•Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).

•Insert batteries as indicated inside the battery compartment.

•Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of this product in a ﬁ re. The batteries inside may explode or leak.

•Never short-circuit the battery terminals.

•Use only batteries of the same or equivalent type, as recommended.

•Do not charge non-rechargeable batteries.

•Remove rechargeable batteries from the product before charging.

•If removable, rechargeable batteries are used, they are only to be charged under adult supervision.