Audiovox DPF710K manual Operating the homebase, Preliminary Connections

Operating the homebase

Preliminary Connections

Prior to initial operation, connection must be made to the power source and the tab (“REMOVE THIS TAB”) on the right side of the unit must be removed to enable backup battery operation.

Connecting the Power. Power to the homebase is provided by the AC-to-DC wall adapter which delivers +9VDC to the DC input connector at the rear of the unit. Refer to the installation procedures outlined previously for the methods involved in connecting the wall adapter plug to the power input connector, and the routing and dressing of the adapter power cable. The figure below illustrates a typical installation.

DC Input	Cable Notch	Wall Outlet
Connector

homebase

(Rear View)AC-to-DC Wall Adapter

Inserting the Memory Card/USB Device. All of the memory devices attach at the left side of the homebase and can consist of a USB Flash Memory, Compact Flash (CF) Memory Card, Multi-Media Card (MMC), Memory Stick (MS) Card, Secure Digital (SD) Card , or and xD Card. All of these devices are inserted in their respective receptacles with the label side facing to the rear.

		USB Flash
		Memory
		Secure Digital (SD),
homebase		Memory Stick (MS),
		Multi-Media Card (MMC)
(Rear View)		xD Card
		Compact Flash
	Label Side	Memory (CF)
	(Typical)
14		DPF710K