28 Using your BT Digital Baby Monitor 250
The timer can be set to countdown from 1 minute to 99 hours 59 minutes.
The feed timer default countdown duration is set at 02:00 (2 hours).
If the Parent unit is switched off, the feed timer countdown will be cancelled and you will need to start it again when the unit is switched back on. The duration, alert type and repeat settings will still be retained.
Feed Timer
You can set a Feed Timer on the Parent unit to act as a countdown timer that will alert you when you next need to feed your baby. You have a choice of alert types (beep, beep & vibe and vibrate) and you can set the timer to repeat itself once the alert sounds.
Set the feed timer countdown duration
1.Press 
. Nightlight is displayed, press 
until Feed Timer is displayed and press 
.
2.Start? is displayed, press 
to display
Duration and press 
.
3.The display will show 00h:00m (or the currently set
timer). Use the | and | buttons to select the |
first digit and press |
| . Repeat this procedure for |
each digit and press | . | |
The display will show Saved and you’ll hear a confirmation beep.
If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp