Using your BT Digital Baby Monitor 250 31
Temperature monitor
There is a temperature sensor on the Baby unit to constantly monitor the temperature in your baby’s room and you’ll be alerted if it gets too hot, too warm or too cold by the colour of the Baby unit nightlight changing and the Parent unit will vibrate, sound an alert beep and display a message on the screen. The alert type on the Parent unit can be changed, see page 32. The temperature will be constantly shown on the Parent unit display in ˚C.
To stop an alert, press any button on the Parent unit.
Temperature monitor indicators
Temperature | On the Baby unit | On the Parent unit |
Below 16°C | Nightlight | Display shows |
| glows Blue | Too Cold |
16 – 20°C | Nightlight |
|
| glows Yellow |
|
21 – 24°C | Nightlight | Display shows |
| glows Orange | Too Warm |
Over 24°C | Nightlight | Display shows |
| glows Red | Too Hot |
IMPORTANT!
The temperature sensor used in this BT Digital Baby Monitor 250 is intended as a guide, to provide parents with an indication of the room temperature in which the unit has been placed.
It is designed to operate within an approximate tolerance of +/- 1°C and is not intended to be as accurate as some medical devices. Please note that your own temperature reference e.g. your central heating thermostat may not be as accurate, possibly due to tolerances and positioning of the thermostat in relation to the Baby Monitor sensor.
Healthcare professionals advise that the ideal temperature for your baby’s room is between 16 °C and 20°C.
Your Parent unit has a
If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp