BT 250 manual Select the type of temperature alert, Temperature alert options

32 Using your BT Digital Baby Monitor 250

Pre-set temperature alert range

The Baby unit comes with pre-set maximum and minimum temperatures, as stated by the UK Department of Health as part of the recommendations to reduce the risk of cot death.

If the temperature falls below or goes above the setting an alert will sound on the Parent unit and the display will show Too Cold or Too Hot as appropriate. If it’s too hot, the Baby unit nightlight will turn red and

if too cold it will turn blue. The temperature alert pre-set temperatures are 15°C (and below) and 25°C (and above).

Alerts will be repeated if the temperature creeps by 2°C into an alerting range.

The default setting is

Beep&Vibe.

Select the type of temperature alert

1.Press . Nightlight is displayed, press

until SetUp is displayed and press .

2.Crying Alert is displayed, press until

Temp Alert is displayed and press .

3.Use the and buttons to display either Beep, Beep&Vibe, Vibrate, Screen Only or

Off and press to select. The display will show Saved and you will hear a confirmation beep.

To stop an alert, press any button on the Parent unit.

Temperature alert options

Beep = Parent unit will beep. icon will flash. Beep&Vibe = Parent unit will beep and vibrate. icon will flash.

Vibrate = Parent unit will vibrate. icon will flash.

Screen Only = icon will flash.

Off = No alerts. icon will not be displayed.

All of the above alerts will also display the appropriate message: Too Hot, Too Warm or Too Cold.

If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp