Using your BT Digital Baby Monitor 250 33
Crying alert
The crying alert will only be activated if Mute All has been switched on (or if the Parent unit volume has been switched to volume off), see page 20 for information on the Mute All feature.
With Mute All switched on, if your baby starts to cry you will not be able to hear the cries, but if the cries sound above a certain level i.e. if they reach 83dBA, which is the 1st red Baby sound level LED, then the Parent unit will activate the crying alert. The default crying alert type is for the Parent unit to vibrate and emit an audible beep but you can select a different alert type if you want to.
Select the type of crying alert
1.Press 
. Nightlight is displayed, press 
until SetUp is displayed and press 
.
2.Crying Alert is displayed, press 
.
3.Use the 
and 
buttons to display either Beep, Beep&Vibe, Vibrate or Screen Only
and press 
to select. The display will show Saved and you will hear a confirmation beep.
To stop an alert, press any button on the Parent unit.
Crying alert options
Beep = Parent unit will beep, Crying Alert will be displayed
and 
icon will flash.
Beep&Vibe = Parent unit will beep and vibrate. Crying Alert
will be displayed and icon will flash.
Vibrate = Parent unit will vibrate only (no alert beep will sound). Crying Alert will be
displayed and the icon will flash.
Screen Only = Crying Alert will be displayed and the icon will flash.
The default setting is Beep&Vibe.
The crying alert is a ‘user alert’ as described on page 34.
If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp