Britax Baby Accessories manual Using the Carrier, Securing Child in Carrier

Page 8

Using the Carrier

Securing Child in Carrier

1Loosen harness completely (fig. A).

2Release the chest clip.

3Unfasten the buckle.

4Move the harness straps to the sides of the carrier.

5Place child in the carrier.

6Position the harness straps over child’s shoulders.

7Fasten buckle.

8Secure chest clip (fig. B).

9Gently pull up on the harness straps to tighten the lap sections (fig. C).

A

B

C

10 Slowly pull the harness adjuster strap to tighten harness for a snug fit (fig. D).

11 Position the chest clip at the center of the child’s chest, level with the child’s armpits. (fig. E).

12 Verify that harness is not twisted and all connections are secure.

13 Verify that harness height is correct.

Refer to Checking Harness Height on page 14 for instructions.

IMPORTANT:

Check the harness tightness before each use.

If buckle or harness will not secure properly, the buckle or adjuster may be clogged with food, drink, or other material that must be removed. See page 33 for cleaning instructions.

Using the Carrier

D

E

12

13

Image 8
Contents Baby Safe Table of Contents Page Safety Information Important NotesCertification RegistrationFeatures 19 20 21 22Harness Basic Carrier FunctionsBuckle Canopy Chest ClipHandle Using the Carrier Securing Child in CarrierHarness Height Adjustment Checking Harness HeightVehicle Seating Positions Vehicle Safety BeltsVehicle Compatibility Isofix Connectors Vehicle Belt Installation SpacersBasic Base Functions Isofix Protective CapUsing Carrier with Base Foot PropBase Installation Isofix InstallationRemoval Isofix GuidesLap-Shoulder Belt Installation Lap Belt Installation Carrier Only Installation Aircraft Installation Carrier is stableCare and Maintenance Buckle InstallationCleaning the Buckle Buckle RemovalCleaning the Cover, Belly pad & Head Support Pillow Cleaning the Shell & HarnessCleaning the Harness Adjuster Cover RemovalWarranty Limited ONE-YEAR Warranty