Britax Baby Accessories manual Checking Harness Height, Harness Height Adjustment

Page 9

Using the Carrier

Checking Harness Height

1 Place child in carrier, then secure harness (see pages 12–13).

2 Observe where the harness is positioned on the child’s shoulders.

Harness straps must be located at or slightly below the child’s shoulders.

3 If harness height

is correct, continue

using child carrier

without adjustment.

Rear Facing Strap Height

Harness Height Adjustment

1Loosen harness completely.

2From the rear of the carrier, unhook the harness straps from the yoke (fig. A).

3Lean head support pillow forward, then pull straps through the shell and cover.

It is not necessary to pull straps through slots in the head support pillow.

Using the Carrier

A

If harness height requires adjustment,

refer to Harness Height Adjustment on

page 15.

4 Thread the harness straps through slots cover and shell, at the new height (fig. B).

5 Reattach harness straps to the yoke (fig. C).

6Pull harness adjuster strap to tighten the harness.

7 Verify that all straps are threaded at the

B

same height and are not twisted.

 

C

14

15

Image 9
Contents Baby Safe Table of Contents Page Important Notes Safety InformationCertification Registration19 20 21 22 FeaturesBasic Carrier Functions BuckleHarness Chest Clip HandleCanopy Securing Child in Carrier Using the CarrierChecking Harness Height Harness Height AdjustmentVehicle Safety Belts Vehicle CompatibilityVehicle Seating Positions Vehicle Belt Installation Spacers Isofix ConnectorsBasic Base Functions Isofix Protective CapFoot Prop Using Carrier with BaseIsofix Installation Base InstallationRemoval Isofix GuidesLap-Shoulder Belt Installation Lap Belt Installation Carrier Only Installation Carrier is stable Aircraft InstallationBuckle Installation Care and MaintenanceCleaning the Buckle Buckle RemovalCleaning the Shell & Harness Cleaning the Cover, Belly pad & Head Support PillowCleaning the Harness Adjuster Cover RemovalLimited ONE-YEAR Warranty Warranty