Battery Replacement

1.5V x 3

"C" (LR14)

SHOWN ACTUAL SIZE

Battery Compartment Door

For best performance, we recommend replacing the batteries that came with this toy with three, new alkaline “C” (LR14) batteries.

•Locate the battery compartment on the back of the Ferris wheel assembly.

•Loosen the screws in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door. Remove the exhausted batteries and throw them away.

•Insert three “C” (LR14) alkaline batteries.

Hint: We recommend using alkaline batteries for longer life.

•Replace the battery compartment door and tighten the screws with a Phillips screwdriver. Do not over-tighten.

•When lights, sounds, or motions from this toy become faint or stop, it’s time for an adult to change the batteries.

Battery Safety Information

Batteries may leak fluids that can cause a chemical burn injury or ruin your toy. To avoid battery leakage:

•Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).

•Insert batteries as indicated inside the battery compartment.

•Remove batteries during long periods of non-use. Always remove exhausted batteries from the toy. Dispose of batteries safely. Do not dispose of batteries in a fire. The batteries may explode or leak.

•Never short-circuit the battery terminals.

•Use only batteries of the same or equivalent type, as recommended.

•Do not charge non-rechargeable batteries.

•Remove rechargeable batteries from the toy before charging.

•If removable, rechargeable batteries are used, they are only to be charged under adult supervision.