Sanyo MOV-212S, MOV-112S instruction manual Precautions for Safe Operation

Page 6

PRECAUTIONS FOR SAFE OPERATION

CAUTION

Select a level and sturdy floor for installation. This precaution will prevent the unit from tipping. Improper installation may result in water spillage or injury from the unit tipping over.

Connect the unit to a power source as indicated on the rating label attached to the unit. Use of

any other voltage or frequency other than that on the rating label may cause fire or electric shock.

tfB Fix the shelves securely. Incomplete installation may cause injury or damage.

When removing the plug from the power supply outlet, grip the power supply plug, not the cord.

Pulling the cord may result in electric shock or fire by short circuit.

Never damage or break the power supply plug or cord. Do not use the supply plug if its cord is loose. This may cause fire or electric shock.

Do not touch any electrical parts such as the power supply plug or any switches with a wet hand. This may cause electric shock.

Check the setting when resuming the operation after power failure or switch off. The stocked

materials may be affected if the setting is changed.

Do not put a container with water or heavy articles on the unit. It may cause injury if the articles fall. Current leakage or electric shock may result form deterioration of insulation by spilled water.

Do not climb onto the unit and do not put articles on the unit. This may cause injury by tipping or

0damage to the unit.

Never touch the inside chamber, door glass, exhaust vent or inside of the door when the unit is operating with high temperature setting as it may cause burn.

Ml Hold the handle when closing the door. This will reduce the likelihood of a trapped finger.

Never place your hand on the glass or use excessive force on the glass. Intentional force may

0break the glass resulting in injury from the broken glass.

Do not lean on the door. This may cause injury, current leakage, or electric shock if the unit tips over or door becomes detached.

Disconnect the power supply plug before moving the unit. Take care not to damage the power cord. A damaged cord may cause electric shock or fire.

• В Be careful not to tip over the unit during movement to prevent damage or injury. ^^ Disconnect the power plug when the unit is not used for long periods.

( \ ) Do not put the packing plastic bag within reach of children as suffocation may result.

Image 6
Contents MOV-112S MOV-212S Contents Precautions for Safe Operation Precautions for Safe Operation \WARNING Precautions for Safe Operation Environmental Conditions Sterilizer Components Sterilizer Components Control panel and keypad Location away from heat generating sources InstallationInstallation site Location with a sturdy and level floorInstallation Before Commencing OperationPrerunning Basic operating flow chart of control panel Operating InstructionsTimer function SterilizationStable running Chamber temperature 50C, Delay time 1 hour Stable running with delay timeStart of operation with no change of setting Press the power keySterilization with timer mode Alarms & Safety Functions Cleaning the inside Routine MaintenanceCleaning of unit Cleaning the frameIf the alarm function operates Trouble ShootingKey operation is disabled Disposal of UnitSpecifications PerformanceSafety check sheet