v i i . o p e r at i n g i n s t r u c t i o n s
|
|
|
Figure 6 |
|
|
| Figure 7 | |
|
|
|
6.If the shell is being installed separately, see positioning shell installation instructions on page 22. To position the shell back, depress the recline lever and pull back. Adjust legrest, tilt and optional recline to appropriate configuration. (See Fig. 7)
C.FOLDING FRAME AND ROTATING HANDLE INTO STORAGE POSITION
Your kid kart is equipped with two stage folding
1.Stage one (See Fig. 9) does not effect the stroller wheels and base allowing only the handle to be brought forward to a storage position. This is useful for transporting the Kid Kart in the back of a station wagon or van.
2.Stage two(See Fig.8) allows complete folding of the Kid Kart handle and base. This folding system is accomplished via the two Stage trigger. (page 20)
|
|
| |
Figure 8 |
|
| |
| Figure 9 | ||
|
NOTE: Seating system removed for clairity
19
mkt3048 9921700000 Rev C