v i i . o p e r at i n g i n s t r u c t i o n s
O.STANDARD SEAT CUSHION ADJUSTMENT
The standard seat cushion comes in two seat lengths, short and long. The short seat is 7" long with capability for adding a 2" growth strip at the back of the cushion. The long seat is 9" long with capa- bility for adding a 2" growth strip at the back of the cushion. Both are capable of adjustment from 5.5 to 11.5 inches width adjustment by adding or removing adductor foam pads.
To adjust width:
1.Unzip and remove seat cover. Add or remove the same combination of adductor foam pads to each side of the seat, to achieve the desired width.
2.
To add growth strip:
1.Unzip seat cover to expose the back edge of the foam cushion.
2.Lift the foam overlay pad at the back of the seat and install the growth strip with tapered ends down.
3.Place the overlay evenly over the growth strip and close the zipper around the growth strip.
Standard Seating
P. CONTOURED SEATING SYSTEM CUSHION ADJUSTMENTS
The contoured seat cushion comes in two lengths: short and long. The short cushion is 7" long with capability to add either a 1 1/2" or 3" growth strip making the length 8 1/2" or 10" respectively. The long cushion is 8" long with capability to add either a 1 1/2" or 3" growth strip making the length 9 1/2" or 11" respectively. These growth strips are added at the center of the seat cushion.
The front and rear section of the cushion has Velcro® attachment points for positioning the adduc- tor wedges provided. They attach to the front and rear section of the cushion under the foam over- lay. The foam overlay attaches to Velcro® at the back of the seat.
Contoured Seating
27
mkt3048 9921700000 Rev C