v i i . o p e r at i n g i n s t r u c t i o n s
Unfold the mobility base and be sure that the wheel locks are engaged.
1.Place the shell over the top of the mobility base, and squeeze the
2.Align the
3.Adjust legrest, tilt and optional recline to appropriate configuration.
G. POSITIONING SHELL REMOVAL
1.Engage wheel locks. Remove child from Kart. The push handle must be in its normal use position to remove the shell.
2.Squeeze and hold the TIS lever. (See Fig.14 page 24)
3.Lift the shell vertically from the mobility base.
Pivot
Slot
Pivot Post
Guide Pin
Figure 14
23
mkt3048 9921700000 Rev C