Operation fig ‘Baby unit’, ‘Parent unit’

SC362 page 5

4. OPERATION

OPERATION (fig. 4)

‘Baby unit’

•Make sure the mains power adapter is connected correctly, or batteries are installed.

•Place the ‘baby unit’ near the baby’s bed, making sure that the microphone is placed in the best position for picking up baby’s sounds.

IMPORTANT!

Make sure that the ‘baby unit’ is always out of reach of the baby; never place the ‘baby unit’ inside baby’s bed or playpen!

•Select the VOICE mode using the mode switch (fig. 1.4).

–The red POWER LED lights up.

–If sound is picked up by the built-in microphone, the ‘baby unit’ starts transmitting automatically. The transmission stops when no sound is picked up any more. During transmission the green TRANSMIT LED lights up.

–The ‘baby unit’ also has a button for manual transmission (TALK fig. 1.5). This function operates both during VOICE and OFF-mode. For manual transmission:

•Keep the TALK button pressed and speak into the microphone.

–Both the red POWER LED and green TRANSMIT LED light up.

–Spoken sound is transmitted until the TALK button is released.

‘Parent unit’

•Make sure that the mains power adapter is connected correctly, or that batteries are installed.

–If mains power adapter is connected correctly, the red adapter LED on the standing base lights up.

–If batteries are installed, the ‘parent unit’ only uses battery power in the event of a mains failure, or when the unit is not placed inside the standing base.

•Place the ‘parent unit’ inside the standing base, near to the parent’s location.

•Switch the ‘parent unit’ to ON to an acceptable sound level (fig. 1.2).

–The red POWER LED lights up.

–If a sound signal is received from the ‘baby unit’, it is heard via the built-in speaker.

• Adjust the sound level as required.

The ‘parent unit’ checks the received sound signal. If the quality is too poor, the signal is blocked. In this case:

•Move the ‘parent unit’ closer to the ‘baby unit’ to restore sound reception again.

–The maximum operating distance is 150 m in ideal conditions.

Notes

–For baby monitoring make sure the ‘baby unit’ is in VOICE mode!

–Do not place ‘baby unit’ and ‘parent unit’ too close to each other while operating. Otherwise the units will start resonating (high-pitch sound).

IMPORTANT!

Before using the Baby phone, check the sound transmission. This checks whether a unit is broken, or whether units are placed out of range of each other. After this first check, sound transmission should be checked on a regular basis as follows:

Have an adult softly speak into the ‘baby unit’. Sounds transmitted from the baby room should be heard clearly via the ‘parent unit’ in another room.

CHANNEL SELECTION

–The Baby phone can use 2 different channels for radio signal transmission. If sound reception is very poor, or other radio signals are being picked up, please try the other transmission channel as follows:

•Move the channel selector on both units to the other channel (fig. 1.1 and fig. 1.3).

Note: Always make sure the channel switches on both units are set to the same position. This ensures optimum reception.

BELT-CLIP

When batteries are installed, the ‘parent unit’ can be used as a truly cordless product. The unit can be carried in and around the house, using the easy belt-clip. This clip can easily be attached to and removed from the ‘parent unit’ (fig. 5).

English

SBC SC 362 specifications

The Philips SBC SC 362 is a remarkable headphone model that epitomizes quality, comfort, and advanced audio technology. Designed for both casual listeners and audiophiles, the SBC SC 362 delivers a superior listening experience with its impressive features and characteristics.

One of the standout attributes of the SBC SC 362 is its sleek and ergonomic design. The headphones are lightweight, making them perfect for extended listening sessions without discomfort. The padded ear cups provide a snug yet comfortable fit, effectively sealing in sound while minimizing ambient noise. This design philosophy allows users to immerse themselves fully in their music, podcast, or audio book without distractions from the outside world.

In terms of audio performance, the SBC SC 362 is equipped with high-quality dynamic drivers that deliver clear and precise sound reproduction across a wide frequency range. Whether you are listening to thumping bass lines, soaring vocals, or intricate instrumentals, these headphones excel in presenting a balanced and natural sound profile. The bass response is rich without overwhelming the mids and highs, ensuring that every element of the audio is engaging.

Another notable feature of the SBC SC 362 is its versatility. It comes with a detachable cable, which not only enhances portability but also allows for easy replacement in case of wear and tear. The cable is designed with durability in mind, and it includes a built-in microphone, making it suitable for making hands-free calls. This feature is especially beneficial for users who are frequently on-the-go.

Additionally, the SBC SC 362 is compatible with a wide range of devices, including smartphones, tablets, laptops, and portable music players. This compatibility ensures that users can enjoy their favorite tunes across various platforms without any hassle.

Overall, the Philips SBC SC 362 headphones combine style, comfort, and exceptional sound quality, making them a premier choice for anyone looking to enhance their audio experience. Whether you are at home, commuting, or traveling, these headphones will undoubtedly elevate your listening pleasure, offering a sophisticated sound profile that satisfies even the most discerning ears. With their thoughtful design and impressive technology, the SBC SC 362 stands out in the crowded headphone market.