Quinny 01474C manual Fold Stroller, 13a, 13b, 13c, 13d, 13e, Removing Wheels, 14a

To Use

TM

13 Fold Stroller	13
NOTE: It is not
necessary to remove
canopy before folding.
Close canopy (Figure
13).
Stand behind the	13a
stroller and push release
button 1 (Figure 13a).
The button will stay
pressed by itself.
Push release button 2	13b
while at the same time
pushing the upper frame
forward (Figure 13b).

Ensure that the handle	13c
crossbar is folded inward
(Figure 13c).

Hold onto stroller by hinge	13d
point. Apply parking brake.
1. Press down release pedal.
2. Pull rear hinge
rearward slightly.
3. Then push rear hinge
forward to fold stroller
(Figure 13d).
If necessary, push down
further on the frame with
your hands to make it	13e
more compact. Place it
inside transport bag
(Figure 13e). Front wheels
go toward the carry strap.
NOTE: To make the
stroller more compact, you
may remove the wheels.
14 Removing the	14
Wheels

Press the release button and pull the rear wheel out of the frame (Figure 14).

Press the release button	14a
on the bottom of each
front wheel and pull
wheel off of the frame
(Figure 14a).

8