Assembly
TM
4 Parking Brake | 4 |
Always use the parking |
|
brake, even when standing |
|
still for only a few |
|
moments! Push down on |
|
the red pedal (P) behind |
|
the rear wheel to set the |
|
parking brake (Figure 4). |
|
Push the opposite pedal to |
|
release the parking brake. | 5 |
5 Attach Shopping |
|
Basket |
|
Locate two loops in the |
|
area under the footrest. |
|
Put strap end through |
|
loop and secure snap |
|
(Figure 5a). | 5b |
|
Locate one ring above 5a each rear wheel. Put
strap end through each ring and secure snap (Figure 5b).
Slide both ends of the canopy into the hinge points until they are securely in place (Figure 6a).
Fasten the canopy to the top of the stroller using the snaps and adhesive patches (Figure 6b). Check to make sure the canopy is fastened securely.
The canopy can be adjusted to two different positions: folded out or folded back (Figure 6c).
To remove the canopy: Unfasten the snaps and adhesive patches and pull the canopy out of the hinge
6a |
6b |
6c
6Canopy
Slide off the hinge covers from the hinge points
points. Slide the hinge covers onto the hinge points (Figure 6d).
and store them for future use (Figure 6).
CAUTION
When removing canopy, always slide hinge covers back on the hinge points.
6d |
4