To Use
TM
WARNING
To avoid serious injury:
•Use ONLY MicoTM infant car seat (not included) with this stroller (model 01474C).
•Please refer to the manufacturer’s instructions for the use of your infant car seat.
•ALWAYS install car seat facing to the rear of the stroller.
•ALWAYS use the restraint system in the car seat.
10 Install Infant Car Seat
Remove the seat. Push the parking brake pedal down.
Insert left and right car seat adapters into hinge points until you hear a “click” (Figure 10).
Car seat must be in rear-facing position.
Lower car seat into car seat adapters until both sides “click” (Figure 10a).
To remove car seat, press both buttons on car seat (Figure 10b). Lift car seat up.
To remove car seat adapters, press gray button and slide adapter off hinge points (Figure 10c).
10
10a
10c
10b
6