ENGLISH
GENERAL
This symbol indicates WARNING. Personal injury and/or damage to property may result if the instructions are not followed carefully.
You must read these instructions for use and the accompanying pamphlet
“SAFETY INSTRUCTIONS” carefully, before starting up the machine.
SYMBOLS
The following symbols appear on the machine. They are there to remind you of the care and attention required in use.
This is what the symbols mean: Warning!
Read the instruction manual and the safety manual before using the machine. Warning!
Watch out for discarded objects. Keep onlookers away.
Warning!
Always wear hearing protectors.
Warning!
This machine is not designed to be driven on public roads.
Warning!
The machine, equipped with original accessories, must not be driven in any direction on slopes with a gradient greater than 10º.
Warning!
Risk of crushing injuries. Keep hands and feet well away from the articulated steering joint.
To lower the implement, press the pedal down so that the lock is released. Lower the implement lifter to the working position by slowly lifting your foot from the pedal.
2. HYDRAULIC LIFTER (Pro20)
Hydraulic implement lifter for raising front- mounted implements to the transport position.
To raise the implement, press the rear part of the switch. Release the switch in the required position.
To lower the accessory, press the front part of the switch. The switch stays in the pressed position and the implement lifter is lowered until it reaches a floating position. This means that the implement can follow the contours of the ground.
The floating position, with the switch in the tilted forward position, is recommended for normal use. To secure the implement lifter, place the switch in neutral.
NOTE! The hydraulic implement lifter must be in floating position in order for the power take- off to be connected.
3. SERVICE BRAKE
A pedal that acts on the machine’s braking system. There are 3 positions:
1.Pedal released – service brake not activated.
2.Pedal depressed halfway – forward drive disengaged. Service brake not activated.
3.Pedal fully depressed – forward drive disengaged. Service brake fully activated.
Warning!
Risk of burn injuries. Do not touch the silencer/catalytic converter.
CONTROLS AND
INSTRUMENTS
Items 1 - 19, see figures 1 - 7.
4. PARKING BRAKE
An inhibitor that can lock the brake pedal in the depressed position.
Depress the brake pedal fully. Move the inhibitor to the right and then release the brake pedal.
The parking brake is released by pressing the brake pedal. The
1. IMPLEMENT LIFTER (President - Comfort - Royal - Pro16)
A pedal for raising
To lift up the implement, press the pedal down as far as it will go. Then release the pedal, the implement lifter is now locked in the raised position.
Make sure that the parking brake is released when operating the machine.
51