Britax LATCHANCHOR manual Adjusting Harness Height, Harness Height Adjustment

Page 35

AdjustingHarnessHeight

Harness Height Adjustment

1Loosen the harness by lifting the adjuster lever located in the front of the seat while pulling the shoul- der straps forward as far as possible (fig. A).

2From the rear of the child restraint, pull the yoke over the top of the harness guard, unhook the shoulder harness from the yoke (fig. B).

3Pull straps through the shell and cover, to the front of the seat.

4Thread the harness straps through the appropriate harness height slots (fig. C).

5Reattach harness straps to the yoke (fig. B).

6Pull harness adjuster strap to tighten the harness.

7Verify that all straps are threaded at the same height and are not twisted.

Yoke

Harness

guard

Image 35

Contents Anch on Side Table of Contents Introduction Important Notes Safety Information Safety Information Child Restraint Features Harness Guard* not shown Important Some vehicles have no seating Vehicle Safety BeltsArea Vehicle Seating Positions Installation Rear Facing Removal See Rear Facing Lap-Shoulder Belt InstallationClick is heard fig. E Rear Facing Lap Belt Installation Installation Rear Facing Switching the Latch Connectors Forward Facing Installation with Latch Installation Forward FacingRemoval If stabilizing bar is extended Belt InstallationSee Checking Buckle Position on Forward Facing Lap Belt Installation Checking Buckle Position Forward Facing Installation Installation In AircraftRear Facing Installation Forward Facing Versa-Tether Versa TetherTMReleasing the Versa-Tether Versa Tether TMRear Facing Versa-Tether Using the Tether Connector Strap rear facing only Recline Adjustment Releasing the Buckle Using the BuckleUsing the Chest Clip Fastening the BuckleSecuring Your Child See Checking Harness Height on To Check Harness Height Checking Harness HeightHarness Height Adjustment Adjusting Harness HeightRefitting the Cover Care and MaintenanceCover Removal Belly Pad RemovalRethreading the Buckle Buckle RemovalCleaning the Harness Cleaning the CoverCleaning the Shell Thoroughly Rinse using warm water fig. B Cleaning the BuckleLimited ONE-YEAR Warranty WarrantyLimitation of Damages Fill out the registration card and mail it in today Registration Information

LATCHANCHOR specifications

The Britax LATCHAnchor is a state-of-the-art car seat installation system designed to simplify the process of securing your child's car seat while enhancing safety and convenience. The LATCH system—an acronym for Lower Anchors and Tethers for Children—was developed to provide a standardized method of attaching car seats to vehicles, ensuring a secure fit without the need for seat belts. The Britax LATCHAnchor exemplifies this system with its innovative and user-friendly design.

One of the standout features of the Britax LATCHAnchor is its easy-to-use installation mechanism. The system includes lower anchors built into the car seat, which connect effortlessly to the vehicle's designated LATCH anchors located in the seat. This design minimizes the chances of user error during installation, as it provides a secure and stable attachment point for the car seat. Additionally, the LATCHAnchor assists parents in achieving a proper installation—reducing the likelihood of improper attachment, which could compromise safety in the event of a collision.

Safety is a top priority, and the Britax LATCHAnchor incorporates advanced safety technologies to protect young passengers. The car seats are designed with energy-absorbing foam and side impact protection features, which work together to cushion and shield children in the event of an accident. The tether system further enhances safety by reducing seat rotation during a crash, thus providing additional security for the child.

In addition to safety and ease of use, the Britax LATCHAnchor boasts noteworthy flexibility. It is compatible with a variety of Britax car seat models and adapts to different vehicle types, making it a versatile option for families. The adjustable straps allow for a snug fit in different seating configurations, ensuring that parents can achieve the best installation possible.

Another significant advantage of the LATCHAnchor system is its convenient storage design. The LATCH connectors can easily be stored within the seat shell when not in use, keeping them tidy and preventing loss. This thoughtful design feature ensures that installation remains a hassle-free experience for parents.

The Britax LATCHAnchor perfectly embodies a blend of cutting-edge technology, user-focused design, and unparalleled safety features. By prioritizing ease of installation, adaptability, and safety, Britax continues to set the standard in child passenger safety. With the LATCHAnchor, parents can confidently transport their little ones, knowing they have chosen a reliable and meticulously engineered solution for their car seat needs.