Britax LATCHANCHOR manual Vehicle Safety Belts, Important Some vehicles have no seating

Page 9

VehicleSafetyBelts

NOTE: The information in this section only applies if you are installing the child restraint using the vehicle seat belts. If using LATCH, this section should be ignored.

IMPORTANT: Some vehicles have no seating

positions which are compatible with this child restraint, or any other child restraint. If in

doubt contact your vehicle manufacturer for assistance.

The following types of vehicle seat belts are not compatible with this child restraint:

Front seat belts with top or bottom anchorage points in the door.

Motor driven automatic seat belts.

Three-point belts that have separate

retractors for the shoulder section and the lap section.

Non-locking (ELR) two-point seat belts.

The owner's manual for your vehicle will have information on the types of seat belts

in your vehicle. If you have belts of the above-listed types, select anoth- er seating position. This child restraint will work with rear seat three- point seat belts with a sliding latch plate, and with rear seat three-point seat belts that are specifically marked as appropriate for child restraints. The middle rear seat of most vehicles has a lap belt which most often will work.

This child restraint can fit securely in most vehicles using the existing seat belts. However, some types of vehicle designs prevent a secure fit of the child restraint due to the position of the seat belt lower anchorage points.

8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Anch on Side Table of Contents Introduction Important Notes Safety Information Safety Information Child Restraint Features Harness Guard* not shown Important Some vehicles have no seating Vehicle Safety BeltsArea Vehicle Seating Positions Installation Rear Facing Removal See Rear Facing Lap-Shoulder Belt InstallationClick is heard fig. E Rear Facing Lap Belt Installation Installation Rear Facing Switching the Latch Connectors Forward Facing Installation with Latch Installation Forward FacingRemoval If stabilizing bar is extended Belt InstallationSee Checking Buckle Position on Forward Facing Lap Belt Installation Checking Buckle Position Installation In Aircraft Rear Facing InstallationForward Facing Installation Forward Facing Versa-Tether Versa TetherTMReleasing the Versa-Tether Versa Tether TMRear Facing Versa-Tether Using the Tether Connector Strap rear facing only Recline Adjustment Using the Chest Clip Using the BuckleFastening the Buckle Releasing the BuckleSecuring Your Child See Checking Harness Height on To Check Harness Height Checking Harness HeightHarness Height Adjustment Adjusting Harness HeightCover Removal Care and MaintenanceBelly Pad Removal Refitting the CoverRethreading the Buckle Buckle RemovalCleaning the Cover Cleaning the ShellCleaning the Harness Thoroughly Rinse using warm water fig. B Cleaning the BuckleLimited ONE-YEAR Warranty WarrantyLimitation of Damages Fill out the registration card and mail it in today Registration Information

LATCHANCHOR specifications

The Britax LATCHAnchor is a state-of-the-art car seat installation system designed to simplify the process of securing your child's car seat while enhancing safety and convenience. The LATCH system—an acronym for Lower Anchors and Tethers for Children—was developed to provide a standardized method of attaching car seats to vehicles, ensuring a secure fit without the need for seat belts. The Britax LATCHAnchor exemplifies this system with its innovative and user-friendly design.

One of the standout features of the Britax LATCHAnchor is its easy-to-use installation mechanism. The system includes lower anchors built into the car seat, which connect effortlessly to the vehicle's designated LATCH anchors located in the seat. This design minimizes the chances of user error during installation, as it provides a secure and stable attachment point for the car seat. Additionally, the LATCHAnchor assists parents in achieving a proper installation—reducing the likelihood of improper attachment, which could compromise safety in the event of a collision.

Safety is a top priority, and the Britax LATCHAnchor incorporates advanced safety technologies to protect young passengers. The car seats are designed with energy-absorbing foam and side impact protection features, which work together to cushion and shield children in the event of an accident. The tether system further enhances safety by reducing seat rotation during a crash, thus providing additional security for the child.

In addition to safety and ease of use, the Britax LATCHAnchor boasts noteworthy flexibility. It is compatible with a variety of Britax car seat models and adapts to different vehicle types, making it a versatile option for families. The adjustable straps allow for a snug fit in different seating configurations, ensuring that parents can achieve the best installation possible.

Another significant advantage of the LATCHAnchor system is its convenient storage design. The LATCH connectors can easily be stored within the seat shell when not in use, keeping them tidy and preventing loss. This thoughtful design feature ensures that installation remains a hassle-free experience for parents.

The Britax LATCHAnchor perfectly embodies a blend of cutting-edge technology, user-focused design, and unparalleled safety features. By prioritizing ease of installation, adaptability, and safety, Britax continues to set the standard in child passenger safety. With the LATCHAnchor, parents can confidently transport their little ones, knowing they have chosen a reliable and meticulously engineered solution for their car seat needs.
Top Page Image Contents