Britax LATCHANCHOR Care and Maintenance, Cover Removal, Belly Pad Removal, Refitting the Cover

Page 36

CareandMaintenance

Cover Removal

1 Loosen the harness by lifting the adjuster lever while pulling the shoulder straps forward as far as possible.

2 Unhook the shoulder straps from the yoke on the rear of child restraint.

3Pull straps through the shell and cover, to the front of the seat.

4Lift cover over buckle.

5Gently remove the upper portion of the cover, by releasing the elas- tic loops. Be careful not to damage the energy absorbing foam.

6Pull the harness straps and chest clip through the slots in the cover.

7Release the elastic loops at the bottom of the cover.

8Gently remove the entire cover from the seat.

WARNING:

•Do not take apart or attempt to take apart the harness. It is unnecessary and dangerous to do so.

•Never remove the buckle tongues from the harness. They can- not be reattached after removal.

Belly Pad Removal

1Remove the buckle and belly pad (see page 36).

2Slide belly pad off the buckle straps.

Refitting the Cover

To refit the cover, reverse Cover Removal directions. Make sure that the shoulder straps are threaded through the chest clips and that the harness is not twisted.

35

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Anch on Side Table of Contents Introduction Important Notes Safety Information Safety Information Child Restraint Features Harness Guard* not shown Vehicle Safety Belts Important Some vehicles have no seatingArea Vehicle Seating Positions Installation Rear Facing Removal Rear Facing Lap-Shoulder Belt Installation SeeClick is heard fig. E Rear Facing Lap Belt Installation Installation Rear Facing Switching the Latch Connectors Installation Forward Facing Forward Facing Installation with LatchRemoval Belt Installation If stabilizing bar is extendedSee Checking Buckle Position on Forward Facing Lap Belt Installation Checking Buckle Position Installation In Aircraft Rear Facing InstallationForward Facing Installation Versa TetherTM Forward Facing Versa-TetherVersa Tether TM Releasing the Versa-TetherRear Facing Versa-Tether Using the Tether Connector Strap rear facing only Recline Adjustment Using the Buckle Using the Chest ClipFastening the Buckle Releasing the BuckleSecuring Your Child See Checking Harness Height on Checking Harness Height To Check Harness HeightAdjusting Harness Height Harness Height AdjustmentCare and Maintenance Cover RemovalBelly Pad Removal Refitting the CoverBuckle Removal Rethreading the BuckleCleaning the Cover Cleaning the ShellCleaning the Harness Cleaning the Buckle Thoroughly Rinse using warm water fig. BWarranty Limited ONE-YEAR WarrantyLimitation of Damages Registration Information Fill out the registration card and mail it in today

LATCHANCHOR specifications

The Britax LATCHAnchor is a state-of-the-art car seat installation system designed to simplify the process of securing your child's car seat while enhancing safety and convenience. The LATCH system—an acronym for Lower Anchors and Tethers for Children—was developed to provide a standardized method of attaching car seats to vehicles, ensuring a secure fit without the need for seat belts. The Britax LATCHAnchor exemplifies this system with its innovative and user-friendly design.

One of the standout features of the Britax LATCHAnchor is its easy-to-use installation mechanism. The system includes lower anchors built into the car seat, which connect effortlessly to the vehicle's designated LATCH anchors located in the seat. This design minimizes the chances of user error during installation, as it provides a secure and stable attachment point for the car seat. Additionally, the LATCHAnchor assists parents in achieving a proper installation—reducing the likelihood of improper attachment, which could compromise safety in the event of a collision.

Safety is a top priority, and the Britax LATCHAnchor incorporates advanced safety technologies to protect young passengers. The car seats are designed with energy-absorbing foam and side impact protection features, which work together to cushion and shield children in the event of an accident. The tether system further enhances safety by reducing seat rotation during a crash, thus providing additional security for the child.

In addition to safety and ease of use, the Britax LATCHAnchor boasts noteworthy flexibility. It is compatible with a variety of Britax car seat models and adapts to different vehicle types, making it a versatile option for families. The adjustable straps allow for a snug fit in different seating configurations, ensuring that parents can achieve the best installation possible.

Another significant advantage of the LATCHAnchor system is its convenient storage design. The LATCH connectors can easily be stored within the seat shell when not in use, keeping them tidy and preventing loss. This thoughtful design feature ensures that installation remains a hassle-free experience for parents.

The Britax LATCHAnchor perfectly embodies a blend of cutting-edge technology, user-focused design, and unparalleled safety features. By prioritizing ease of installation, adaptability, and safety, Britax continues to set the standard in child passenger safety. With the LATCHAnchor, parents can confidently transport their little ones, knowing they have chosen a reliable and meticulously engineered solution for their car seat needs.
Top Page Image Contents