InStep SS150, SS100 manual RearWheel Assembly, To engage rear brakes

Page 3

Step 2. RearWheel Assembly

Turn stroller onto its side. Grasp rear wheel in one hand, slide wheel’s axle into hole in rear of frame (Figure B1). Check to see that the wheel is properly inserted by pulling on the wheel ﬁrmly, the wheel should not come off if fully inserted/locked. Repeat for other side. To release wheel push up on axle release lever while pulling off wheel (Figure B2).

To engage rear brakes:

Step lightly on the side brake levers or rear brake bar to engage brakes. To disengage, lift up on brake levers or bar (Figure B3).

Storage Latch

Side Latches

Rear

Axle

Rear

Frame

Axle Release Lever

Rear Brake Bar

Brake Levers

Image 3

Contents Saturn Stroller Operating Instructions Safety RulesUnfold Stroller Model SS100 and SS150 Saturn Stroller Assembly InstructionsStroller Assembly and Use Instructions Parts ListTo engage rear brakes RearWheel AssemblyFrontWheel Assembly Front Fender AssemblyTo lock the front wheel from turning Proper use of Seat Belt Shoulder Straps, and Recline Installing ChildTrayInstalling Parent’s Convenience Tray Adjusting Handle HeightTo recline seat Using the infant car seat adapter barMounting infant car seat onto the adapter bar Check fasteners Care and MaintenanceTo clean seat and canopy To clean frame