InStep SS150 Installing ChildTray, Installing Parent’s Convenience Tray, Adjusting Handle Height

Step 5. Installing ChildTray

Position tray as shown with the levers open, when aligned close both levers to lock in place (Figure E). To remove open both levers and pull off. Note the child tray can not be used when using the car seat adapter bar.

Step 6. Installing Parent’s Convenience Tray

Snap parent tray onto the handlebar aligning the tray’s holes with the handlebar’s knobs (Figure F).

Step 7. Adjusting Handle Height

While pushing both handle buttons in, rotate handle to the desired height (Figure G).

Step 8. Proper use of Seat Belt,

Shoulder Straps, and Recline

WARNING: Avoid serious injury from falling or sliding out. Always use seat belt.

1.Place child in stroller seat. Make sure T-shield is between the child’s legs.

2.When child is seated, place shoulder straps over the child’s shoulders and clip onto the waist ring.

3.Buckle the T-shield buckles into the side waist buckles. Adjust the waist and shoulder straps for snug fit (Figure H).

G

Handle Adjust

Button

Handle Adjust

Button

E

Child Tray

Levers

F

Parent Tray Hole

Handlebar Knob

H

Shoulder

Straps

Waist

Strap

T-shield

5