Baby Trend 1304TW manual Installation Instructions for Graco Snug Ride

Installation Instructions for Graco® Snug Ride

The Double Snap-N-Go®will accommodate the Graco® Snug Ride Infant Car Seat. Please follow the following instructions for proper installation of the Snug Ride.

Front Seat:

1.Remove (unscrew) Crossbars B1, and C from the Double Snap-N-Go®frame Remove the Car Seat Straps from the Double Snap-N-Go®frame. Retain the screws you remove.

2.Attach the Car Seat Straps to the Double Snap-N-Go®frame using the two holes labeled #5 as shown in figure 1. Use the two screws that you removed in step 1.

Rear Seat:

1.Remove (unscrew) Crossbars B2 and B1 from the Double Snap-N-Go®frame. See figure 2.

Insertion of the Graco® Snug Ride Infant Car Seat

1.With one hand grasp the car seat handle (in its upright, carrying position) and gently place the seat, so that the baby faces the rear of the Double Snap-N-Go®, onto the Double Snap-N-Go®so that the large groove on the seat bottom, nearest the head-end of the seat, hooks over Crossbar A1 in the front or crossbar A2 in the rear. Check that the seat locked onto the Crossbar. See Figure 3. FOR SAFE OPERATION, IT IS VERY

IMPORTANT THAT THE SEAT LOCK SECURELY ONTO THE CROSSBAR.

2.Feed the Car Seat Straps through the auto belt slots on the infant car seat as shown in Figure 4 and snap the two buckles together. The first time your do this, you will need to adjust the length of the strap for a tight fit around the car seat. FOR SAFE OPERATION, IT IS VERY IM-

PORTANT THAT THE CAR SEAT STRAP IS ALWAYS TIGHTLY FASTENED OVER THE CAR SEAT.

3.Test for secure installation by moving the car seat in all directions. The car seat should be securely attached to the Double Snap-N-Go®.

Removal of the Graco® Snug Ride Infant Car Seat

1.Unlock the Car Seat Strap and remove from over the infant car seat.

2.With one hand, grasp the car seat handle (in its upright, carrying posi- tion) and with your other hand squeeze the handle on the back of the car seat and lift the car seat upward from the Double Snap-N-Go®frame. See Figure 5.

Hole #7		Hole #1
	Hole #5
		Bar A1
Bar D	Strap
	Fig. 1
	Hole #5	Hole #2

Bar A2

Strap

Fig. 2

Fig. 3

Fig. 4

Graco® and Cozy Carry are the trademarks of their owners. They are not	Fig. 5
associated with Baby Trend and no approval or endorsement is implied.		12