Assembly

To hire an authorized service technician to assemble the abdominal exerciser, call 1-800-445-2480. Assembly requires two persons. Place all parts of the abdominal exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

In addition to the included tool(s), assembly requires a Phillips screwdriver		and an
adjustable wrench	.

See the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it has been preassembled. To avoid damaging parts, do not use power tools for assembly.

M8 Locknut	M10 Locknut	M4 Washer
(46)–1	(38)–1	(48)–2

M10 Curved	Large Washer
Washer (39)–2	(41)–1



M4 x 16mm	M6 x 16mm Button	M8 x 15mm	Button
M4 x 16mm	M6 x 16mm Button	M8 x 15mm	Button
Screw (31)–2	Screw (28)–4	Screw (29)–12

M6 Washer			M8 Washer

(35)–4			(34)–13

Pivot Washer

(43)–1

M8 x 52mm Button

Bolt (47)–1

M10 x 157mm Button Bolt (30)–1