Hoist Fitness CL-2403 owner manual Large Cam Assembly

A SS E M B LY

I N S T R U C T I O N S

Step 2e

F R A M E A S S E M B L Y

Start by sliding the 14 25/32” Long Shaft onto the Small Cam Assembly and secure it on the second hole with the 3/8” x 2” Spiral Roll Pin. Then, slide on 1.175” O.D. x .9375 I.D. x 36” Rubber Grip (cut to fit) until it is flush with the Small Cam Assembly. Next slide the Large Cam Assembly on the same size shaft (14 25/32”) and secure it with another 3/8” x 2” Spiral Roll Pin. Attach the Cam Stopper to the Large Cam Assembly on the back hole. Next slide on 1.175 ” O.D. x .9375 I.D. x 36” Rubber Grip (cut to fit) as shown. Now slide both Flange Bearings on each side of the 14 25/32” Long Shaft. Then attach to the Weight Cage as shown. Make sure to put zerk fitting facing down on Flange Bearings Wrench tighten bolts.

Part Descriptions		Hardware Descriptions
27	- Rubber Grip (36” LG.)	J - 3/8”-16 x 1 1/2” Button Head Screw (White Zinc)
29	- Large Cam Assembly	G - 1/2”-13 x 1” Flat Head Cap Screw (White Zinc)
30	- Small Cam Assembly	V - 3/8”-16 x 1 1/4” Button Head Screw (Black Zinc)
31	- Shaft (14 25/32” LG.)	AH - 3/8” Flat Washer ( White Zinc)
57	- Cam Stopper	AK - 3/8” Flat Washer (Black Zinc)

BB - 3/8” Lock Nut (Black Zinc)

CH - Flange Bearing

CJ - 3/8” x 2 “ Spiral Roll Pin

CQ - Insert

Page 13

HOIST

FITNESS SYSTEMS

R

2403 Assembly