9
7
2
17
DASH VIEW
ASSEMBLY | F | |
9 |
|
|
6 | Steering | Hole |
| ||
| Column |
|
| 4 | BOTTOM VIEW |
•Wipe the steering column with a paper towel to remove any excess lubricant.
•Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils.
•Place the labels exactly as shown in the illustration.
•Turn the vehicle on its side.
•Insert the straight end of the steering column up through the hole in the vehicle floor and out through the hole in the dash.
•For best results, avoid repositioning a label once it has been applied to the vehicle.
| Key Assembly |
| Dash |
| 3 |
• | Insert and “snap” the key assembly into the opening in the dash, |
| as shown. |
End of
Steering
Column
Washer
Steering
Rod Hole
5
•Insert the end of the steering column through the hole in the steering rod.
•Fit the 3/8" washer on the end of the steering column.
9 |