|
| ASSEMBLY | F |
|
| Seat | Sport Bar |
|
|
| |
Seat Back |
|
|
|
Tabs |
| Tabs |
|
|
|
| |
| B | PUSH |
|
| HERE |
| |
|
|
| |
C |
|
|
|
Slot |
|
|
|
|
| A |
|
|
|
| Supports |
18 | SIDE VIEW |
|
•With the seat at an angle, insert the tabs on the front edge of the seat into the slots in the
•Push down firmly on the edge of the seat above each tab to snap the tabs into the slots B .
•Rotate the back of the seat down C to snap the seat back tabs into the slots in the vehicle. Push down firmly on the seat back.
20
•Fit a support to one side of the sport bar.
•Insert a #8 - 32 x 1.625" screw through the support, the sport bar and out through the support.
•Fit a #8 acorn lock nut to the end of the screw.
•While holding the acorn lock nut with an adjustable wrench or pliers, tighten the screw.
•Repeat this procedure to fasten the other support to the sport bar.
Lights
19 | BACK VIEW |
•Insert a #8 x 1" screw into the rear edge of the seat. Tighten the screw.
Light
Covers
21
•Fit the remaining light covers to the top of the sport bar, as shown.
•Insert a #10 x 1/2" screw into each light cover. Tighten the screws.
13 |