Assembly | |||
8 Steering Wheel | 10 | ||
Steering |
|
| |
Wheel |
| 28 | |
Cap |
| ||
|
| ||
• Fit the steering wheel cap into the center of the steering | • | Face the front of the vehicle. | |
• | Apply labels to the vehicle body grille as shown. Make | ||
wheel with the screw holes aligned. | |||
| sure the areas where the labels will be applied are | ||
• Insert two #8 x 1" screws as shown. |
| ||
| clean and dry. For best adhesion, avoid applying the | ||
• Tighten the screws with a Phillips screwdriver. Do not |
| labels more than once. | |
|
| ||
9 | Wide Tab | Wide Notch |
| ||
|
|
Lens
Lens Guard
•Fit the wide notch in the side of a headlight lens under the wide tab on a lens guard.
•Press firmly on the inside of the headlight lens to snap it into the lens guard.
•Repeat this procedure to assemble the other headlight lens to the remaining lens guard.
11 | Grille |
| |
Slots |
|
Tabs |
|
•Fit the lens tabs on the back of a lens assembly into the headlight slots in the grille.
•Press firmly to snap the lens assembly into the grille.
•Repeat this procedure to snap the other lens assembly into the grille.
12