Fisher-Price 78490 owner manual Kctm Light Rack Back Half

Assembly
20	22	KCTM Light Rack - Back Half
Sport Bar Bracket
		Tabs
Ring
Sport Bar
Tab
Sport Bar Support	Sport Bar
Hole
Side Leg		KCTM Light Rack -
		Front Half
• Using safety scissors, remove the sport bar brackets	• Position the sport bar with the ends on a flat surface,
from the plastic connector. Dispose of the plastic
	as shown.
connector.
	• Fit and hold the front and back halves of the KCTM light
• Position the sport bar upright.
	rack against the sport bar. Make sure the two KCTM light
• Position a sport bar bracket above one of the sport bar
	rack halves are aligned, and that the screw holes in the
side legs, as shown.
	KCTM light rack are aligned with the screw holes in the
• Insert the tab on the inside of a sport bar bracket into the
	sport bar.
hole in the sport bar side leg.
	• Snap the tabs on the front half of the KCTM light rack into
• Fit the ring on a sport bar support against the end of the
	the slots below the light housings on the rear half of the
sport bar bracket.
	KCTM light rack.

• Fold the sport bar bracket over the sport bar to close it

around the sport bar and sport bar support.• Insert two #6 x11/2" screws through the holes in the back of the KCTM light rack, through the sport bar, and into the

front half of the KCTM light rack.

21	• Tighten the screws with a Phillips screwdriver. Do not
	over-tighten.
Sport Bar Bracket	23	Slots
		Light Covers
Sport Bar	Housing
Sport Bar Support

• Insert a #6 x 11/2" screw into the sport bar bracket
as shown.
		• Align the four tabs on the inside of a light cover
• Tighten the screw with a Phillips screwdriver. Do not
		with the four slots in one of the light housings on the
over-tighten.
		KCTM light rack. (Make sure the light covers are
• Repeat steps 20 and 21 to attach the other sport bar		positioned with the wide spaced tabs at the top.)
support to the other sport bar side leg.
		• Push firmly on the light cover to snap it to the housing.
		• Repeat this procedure on the other side of the
	15 KCTM light rack to assemble the other light.