EXPERT TRAINER (6+ YEARS)
Hint
If your child is having trouble programming voice commands, try program- ming more than one word or a word with multiple syllables. For example, instead of programming the command “sit”, try programming “sit down”.
Important!
If programming fails after several tries, your child may be too young to speak clear enough (or clear enough repetively) to program the P.P.T.
We recommend that your child use the dog in Trainer in Training mode.
Congratulations!
Voice command program- ming is now complete! Now, fill in the chart on page 13.
•Open the Large Cover on the P.P.T.
•Press a Command Button 
on the P.P.T.
•Listen for the voice prompt through the remote headset. “Please say sit.”
•Now, it’s your child’s turn to say the command.
Your child says: “Sit.”
•If your child speaks too loud, too soft, too soon, or unclear, the voice prompt may say: “Too loud. Please try again.”; or “Too soft. Please try again.”; or “Too soon. Please try again.”; or “What did you say?”
Again, your child says: “Sit.”
•If the P.P.T. does not recognize the voice command after three tries, the voice prompt says: “Training failed.” If this happens, please press a Command Button again and start the voice command programming process again.
•When programming a voice command is successful, the voice prompt will ask your child to repeat the command a second time. “Please repeat sit.”
•Your child now needs to repeat the command again in a clear, normal voice.
Your child says: “Sit.”
•If the repeated voice command is not recognized, the voice prompt will repeat the request.
•When programming a voice command is complete, the voice prompt will tell you that programming is complete, and you will hear the command in your child’s voice.
“Training Sit complete.”
•Repeat this sequence to program all nine commands. Then, slide
the Program Switch to Play ★, and close the
Program Switch Door.
11