Baby Trend CSO190AD809 manual Attaching the Canopy, Adjustment of the Shoulder Straps

Page 28

5.0FEATURES

5.8Attaching the Canopy

Slip the canopy stays through the sleeves on the canopy.

The canopy is attached by inserting the ends of the canopy plastic stays into the female fittings found on the inside of the handle hub.

5.9 Adjustment of the Shoulder Straps

WARNING

Failure to properly adjust the harness on your child increases the risk of death or serious injury in the event of a sharp turn, sudden stop or crash. Please follow the instructions very closely to ensure that the harness is properly adjusted to fit your child at all times. Your child will grow very rapidly! Please check the fit of the harness every time you use the Safety Seat.

Adjustable Back Safety Seat

The Adjustable Back Safety Seat includes a sliding back component that will adjust the height of the harness straps as the back is adjusted.

28

Image 28

Contents FLEX-LOC Table of Contents Setting Proper Recline of the Safety Seat / Base Your child’s safety depends on HOW to Register Your Safety Seat RegisterSafety Safety InformationAbout your child About your vehicleSafety Standards About Active Air Bags About an unoccupied Safety Seat About this Safety Seat About use as a carrierSafety Safety Location Selecting the Best Location for the Safety SeatOverall Considerations in Selecting a Location Location Check that the Vehicle Seat Belt is Safe to Use Location Location Location Location Seat -2 Safety Seat Features and Their Proper USE Features5-Point Harness Rear view of Adjustable Back Model Rear View of Fixed Back Model Base Vehicle Belt Path Use of the Safety Seat with the Base Other Features HarnessSeat Angle Indicator Seat Angle AdjusterCrotch Strap Locking ClipOperation of the Carry Handle Adjustment of the Shoulder Straps Attaching the CanopyFixed Back Safety Seat Proper height is even or Just below shoulder Adjuster Plate. Fig To 1 inch above thigh Crotch strap anchor clip Safety Seat. Fig Securing your Child in the Safety Seat / Carrier Using Infant RestraintInfant Restraint Infant Restraint For the 5-Point Harness Installation Securing the Safety Seat or Base in the VehiclePreparation Latch connectors as shown in Fig 44-1 Through the Safety Seat without the Base To tighten a lap belt only Installation Installation of the Base using Latch Safety Seat and lifting upward on the Safety Seat. Fig Baby Trend at 1-800-328-7363 for assistance Setting Proper Recline of the Safety Seat / Base Foot Adjustment Lock Button Securing the Safety Seat or Base in the Vehicle Final Safety Checks Final ChecksADD’L Information Using the Safety Seat in an AirplaneAdditional Information ADD’L Information Replacement Parts