7.0INSTALLATION
8.A lap/shoulder combination seat belt with a buckle that can slide freely along the seat belt may require the use of a locking clip.
(Fig.
•To install the locking clip, tighten the buckled seat belt by pulling upward on the shoulder portion of the seat belt while pushing down hard on the Safety Seat or Base.
•While maintaining downward pressure on the Safety Seat or Base, squeeze the shoulder belt and lap belt together just above the buckle to prevent from moving. Unbuckle the seat belt being careful to prevent movement of the buckle.
•Secure the shoulder belt to the lap belt by installing the locking clip 1/2 inch from the buckle as shown in Fig.
•
Fig.
Fig.
Fig.
42