5.0FEATURES
Adjuster Plate. From the front of the seat, pull the Harness Straps through the shoulder area slots and seat pad.
6.Using the included Belt Threading Tool, insert the Harness Straps through the Slots selected in step 2 above, in the seat pad and the seat shell, respectively. (Fig.
7.From the rear of the Safety Seat, pull the
Harness Straps through the Slots until you have enough strap to reach the Belt Adjuster Plate.
8.Reassemble the Harness Straps to the Belt Adjuster Plate. Do the left Harness Strap first, followed by the right Harness Strap.
Check that Harness Straps are completely within the Belt Adjuster Plate loop (Fig.
You have two adjustment positions on the harness. Use Position A for a smaller child, and Position B for a larger child. If using Position A, loop B must be on top of the Belt
Adjuster Plate. (Fig. 31-3)
9.Inspect the Harness Straps from the front and rear to ensure that they are not twisted. Twisted straps can prevent proper tightening of the Harness and thus may not adequately restrain your child in a sharp turn, sudden stop or crash.
Belt Threading Tool
Fig.
AA B
Fig.
A
A
B
B
Fig.
31