Using the Versa-Tether, Tether Connector Strap

Installation: Versa-Tether®

Using the Versa-Tether®

1 Consult your vehicle owner’s manual for
	approved tether-anchorage locations.
2	Locate the tether on the rear of the child
	seat and remove the tether components
	from the pouch. Place the tether up and
	over the child seat back.	A
3	Install the child seat using the LATCH	A
	system or the vehicle belts based on the
	instructions in this manual.
4	Lift the tether release tab; then pull to fully
	extend the tether strap into a “V” shape.
5	Locate the hook on the strap and loosely
	attach the tether to an anchor point.
•	See ﬁgure A for forward-facing installation.
•	See ﬁgures B and C for rear-facing installations.	B
6	Secure the child seat by a seat-belt OR	B
	with the LATCH connectors.
7	Pull the tether adjuster strap to remove all
	slack.
8 Verify there is tension in the tether strap
	and that the child seat is properly secured.
•	The child seat is secure when it cannot be moved
	front-to-back or side-to-side more than 1 inch
	(2.5 cm.) at the belt path.	C
NOTE:
•	The rear-facing recline angle of the child seat
	should be 30º– 45º from vertical (not to exceed 45º) when car is parked
	on a level surface (Figs. B and C).
•	The rear-facing recline angle can be adjusted by placing a rolled towel or
	pool noodle in the crease of the vehicle seat.

Installation: Versa-Tether®

Tether Connector Strap

WARNING! Only use the tether connector strap for rear- facing tether installation.

Because every vehicle model is different, sometimes you cannot ﬁnd a location to

properly anchor the tether or the structural part of the seat is too large for the hook. Use the tether connector strap to assist in creating an anchor point (Fig. D). 1 Find a ﬁxed vehicle seat belt anchor or

vehicle seat leg (that is bolted to the D ﬂoor) to which the strap can be wrapped around.

2 If you cannot ﬁnd an acceptable location to create an anchor point, contact the vehicle manufacturer to identify a suitable tether connection point.

3 Loop the strap around the metal anchor.

4 Take the metal D-ring and thread it through the webbing loop on the other end of the strap.

5 Pull the metal D-ring all the way through until the strap is tight around the metal anchor.

6 Use the D-ring as an attachment point for hook on tether strap.

Roundabout specifications

The Britax Roundabout is a well-regarded convertible car seat that exemplifies safety, comfort, and convenience for parents and children alike. Designed to accommodate children from approximately 5 to 65 pounds, it provides a versatile seating solution suitable for infants and toddlers as they grow.

One of the standout features of the Britax Roundabout is its dual mode functionality, allowing it to function as both a rear-facing and forward-facing car seat. This flexibility enables parents to keep their child in the safer rear-facing position for as long as possible, which is highly recommended by safety experts. The Roundabout easily transitions to forward-facing once the child surpasses the appropriate weight and height limits, making it a long-lasting investment.

Safety is paramount with the Britax Roundabout, which is equipped with innovative technologies designed to enhance protection during a collision. The seat incorporates Britax's SafeCell Impact Protection system, featuring a base that compresses to reduce the impact of a crash and protect the child’s head, neck, and spine. Additionally, the seat comes with side impact protection, which provides extra security in the event of a side collision.

Comfort is also a key aspect of the Roundabout's design. The seat features plush, padded fabric to ensure a cozy ride for your little one. The seat cover is also easy to remove and machine washable, providing convenience for parents when it comes to cleaning up spills and messes.

Installation of the Britax Roundabout is designed to be straightforward and user-friendly. It is equipped with the ClickTight Installation System, which allows for easy and secure installation using the vehicle's seat belt or LATCH system. This technology minimizes the risk of installation errors, which are common with other car seats.

Other notable characteristics include multiple recline positions for added comfort during long journeys and a 5-point harness system that ensures a secure fit for children of different sizes. The Roundabout is also known for its durable construction, which contributes to its longevity and reliability.

In summary, the Britax Roundabout is a convertible car seat that stands out due to its combination of safety features, user-friendly installation, and comfort. As children grow, the Roundabout adapts to their needs, making it a practical choice for parents seeking a dependable and versatile car seat for their family.