Britax Roundabout manual Energy-Absorbing Tether, Switching the Latch Connectors

Page 16

Installation: Versa-Tether®

Energy-Absorbing Tether

Child Seat Functions

Switching the LATCH Connectors

WARNING! The Energy Absorbing Tether has been designed to help indicate when this child seat has been involved in a moderate or severe crash and replacement of the

child seat is necessary.

Figure A shows the tether when the child seat is acceptable for continued use (provided the child seat has not been involved in a crash).

The colored stitching will be intact and the A webbing will be looped inside the shell.

Figure B shows the tether when the child seat is unacceptable for continued use. If one or both of the loops have pulled through B the back side of the shell and/or any of the

colored stitching has ripped on either side, the child seat is no longer acceptable for use. Discontinue use of the child seat.

The LATCH strap may need to be switched for proper alignment in rear-facing (Fig. C) versus forward-facing (Fig. D) installations. If a proper connection cannot be achieved, complete the following procedure to switch the connectors.

1￿ Lift the front of the child seat cover to access the LATCH connectors.

2￿ Pull the LATCH strap and connectors from the child’s right side of the child seat.

3￿ Thread the LATCH strap and connectors through the appropriate belt path ensuring that the larger part of the connector is on top for the installation procedure you wish to use (Fig E).

•Verify that the harness is not twisted. IMPORTANT: When installing this child seat in rear-facing mode, the LATCH strap must rest behind the child seat buckle.

C Rear-Facing

D Forward-Facing

Release Top Button

IMPORTANT: Regardless of whether loops have pulled through the back side of the shell and the colored stitching has been ripped, discontinue use of the child seat if it has been involved in a moderate or severe crash.

NOTE: To ensure LATCH connector is properly E aligned with vehicle’s LATCH anchor, the connector’s

red release button should face away from vehicle seat back, and the larger of the two connector sections is on top (Fig. E).

4￿ Replace cover and continue with LATCH installation procedure.

28

29

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Roundabout Table of Contents Page Certification Important NotesRegistration Important Harness Adjustments Forward-FacingRear-Facing Do not use the child seat forward-facing ifChild Seat Features Vehicle Safety Belts Cannot be used. See diagram belowVehicle Buckle Positions Vehicle Seating PositionsLatch Installation Removalfirst rear-facing belt slot Fig. C Lap-Shoulder Belt InstallationPerform as intended Lap-Belt Installation Facing on vehicle seatSeat while removing slack from the vehicle belt Then close the lock-off arm Fig. E and replace the coverRed release button on the Latch connector PoundsDisconnect the Versa-Tetherfrom the tether anchor Slots. SeeLock-off upward until secured Fig. E Lap-Belt Installation Aircraft Installation Safety InformationRear-Facing Installation Forward-Facing InstallationUsing the Versa-Tether Tether Connector StrapWith the Latch connectors Secure the child seat by a seat-belt orEnergy-Absorbing Tether Switching the Latch ConnectorsChild seat is necessary Storing the Latch Connectors Recline AdjustmentChest Clip Harness BuckleHow to Adjust Harness Slot Height Securing Your ChildSponge Clean using warm water and mild soap Child Seat Cover RemovalCleaning the Harness Buckle Harness Buckle RemovalRe-threading the Harness Buckle Fully recline the child seatWarranty Double Check Car Seat-to-Vehicle Installation Double Check Child-to-Car Seat Installation

Roundabout specifications

The Britax Roundabout is a well-regarded convertible car seat that exemplifies safety, comfort, and convenience for parents and children alike. Designed to accommodate children from approximately 5 to 65 pounds, it provides a versatile seating solution suitable for infants and toddlers as they grow.

One of the standout features of the Britax Roundabout is its dual mode functionality, allowing it to function as both a rear-facing and forward-facing car seat. This flexibility enables parents to keep their child in the safer rear-facing position for as long as possible, which is highly recommended by safety experts. The Roundabout easily transitions to forward-facing once the child surpasses the appropriate weight and height limits, making it a long-lasting investment.

Safety is paramount with the Britax Roundabout, which is equipped with innovative technologies designed to enhance protection during a collision. The seat incorporates Britax's SafeCell Impact Protection system, featuring a base that compresses to reduce the impact of a crash and protect the child’s head, neck, and spine. Additionally, the seat comes with side impact protection, which provides extra security in the event of a side collision.

Comfort is also a key aspect of the Roundabout's design. The seat features plush, padded fabric to ensure a cozy ride for your little one. The seat cover is also easy to remove and machine washable, providing convenience for parents when it comes to cleaning up spills and messes.

Installation of the Britax Roundabout is designed to be straightforward and user-friendly. It is equipped with the ClickTight Installation System, which allows for easy and secure installation using the vehicle's seat belt or LATCH system. This technology minimizes the risk of installation errors, which are common with other car seats.

Other notable characteristics include multiple recline positions for added comfort during long journeys and a 5-point harness system that ensures a secure fit for children of different sizes. The Roundabout is also known for its durable construction, which contributes to its longevity and reliability.

In summary, the Britax Roundabout is a convertible car seat that stands out due to its combination of safety features, user-friendly installation, and comfort. As children grow, the Roundabout adapts to their needs, making it a practical choice for parents seeking a dependable and versatile car seat for their family.
Top Page Image Contents