Britax Roundabout manual Lap-Belt Installation

Page 13

Installation: Forward-Facing

Lap-Belt Installation

• Figure A illustrates a typical forward-facing, lap-belt installation.

• When not in use, always store the LATCH connectors in storage slots. See page 30.

WARNING! This child seat must not AForward-Facingbe used forward-facing for children

less than one year of age OR weighing less than 20 pounds.

IMPORTANT: Britax recommends that the Versa- Tether® be used at all times. Using the tether will improve the stability of the child seat and reduce the B risk of injury. Check your vehicle owner’s manual for approved tether anchor locations.

1￿ Place the child seat forward-facing on the vehicle seat.

•Child seat may be in upright or recline position. See Recline Adjustment on page 30.

2￿ If the vehicle is equipped with an approved C tether anchor for the chosen seating position,

remove the Versa-Tether®from the pouch and place it up and over the child seat back.

3￿ Pull the vehicle belt out and thread it through the forward- facing belt path (Fig. B).

4￿ Verify that the vehicle belt is not twisted and buckle (Fig. C).

5￿ Push the child seat firmly into vehicle seat while tightening the vehicle belt.

Installation: Forward-Facing

6￿ If the vehicle is equipped with an approved tether anchor, attach the Versa-Tether®hook to an approved tether anchor. Remove all slack from tether to secure. Store excess webbing in the tether pouch. See pages 25 – 28.

7￿ Verify that the vehicle belt is tight, locked, and child seat is secure.

•The child seat is secure when it cannot be moved front-to-back or side-to- side more than 1 inch (2.5 cm.) at the belt path.

Removal

•If connected, disconnect the Versa-Tether®from the tether anchor.

•Press the red release button on the vehicle belt buckle and pull the vehicle buckle from the child seat belt path.

22

23

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Roundabout Table of Contents Page Certification Important NotesRegistration Forward-Facing Important Harness AdjustmentsRear-Facing Do not use the child seat forward-facing ifChild Seat Features Cannot be used. See diagram below Vehicle Safety BeltsVehicle Buckle Positions Vehicle Seating PositionsRemoval Latch Installationfirst rear-facing belt slot Fig. C Lap-Shoulder Belt InstallationPerform as intended Facing on vehicle seat Lap-Belt InstallationSeat while removing slack from the vehicle belt Then close the lock-off arm Fig. E and replace the coverPounds Red release button on the Latch connectorDisconnect the Versa-Tetherfrom the tether anchor Slots. SeeLock-off upward until secured Fig. E Lap-Belt Installation Safety Information Aircraft InstallationRear-Facing Installation Forward-Facing InstallationTether Connector Strap Using the Versa-TetherWith the Latch connectors Secure the child seat by a seat-belt orEnergy-Absorbing Tether Switching the Latch ConnectorsChild seat is necessary Recline Adjustment Storing the Latch ConnectorsChest Clip Harness BuckleSecuring Your Child How to Adjust Harness Slot HeightChild Seat Cover Removal Sponge Clean using warm water and mild soapHarness Buckle Removal Cleaning the Harness BuckleRe-threading the Harness Buckle Fully recline the child seatWarranty Double Check Child-to-Car Seat Installation Double Check Car Seat-to-Vehicle Installation

Roundabout specifications

The Britax Roundabout is a well-regarded convertible car seat that exemplifies safety, comfort, and convenience for parents and children alike. Designed to accommodate children from approximately 5 to 65 pounds, it provides a versatile seating solution suitable for infants and toddlers as they grow.

One of the standout features of the Britax Roundabout is its dual mode functionality, allowing it to function as both a rear-facing and forward-facing car seat. This flexibility enables parents to keep their child in the safer rear-facing position for as long as possible, which is highly recommended by safety experts. The Roundabout easily transitions to forward-facing once the child surpasses the appropriate weight and height limits, making it a long-lasting investment.

Safety is paramount with the Britax Roundabout, which is equipped with innovative technologies designed to enhance protection during a collision. The seat incorporates Britax's SafeCell Impact Protection system, featuring a base that compresses to reduce the impact of a crash and protect the child’s head, neck, and spine. Additionally, the seat comes with side impact protection, which provides extra security in the event of a side collision.

Comfort is also a key aspect of the Roundabout's design. The seat features plush, padded fabric to ensure a cozy ride for your little one. The seat cover is also easy to remove and machine washable, providing convenience for parents when it comes to cleaning up spills and messes.

Installation of the Britax Roundabout is designed to be straightforward and user-friendly. It is equipped with the ClickTight Installation System, which allows for easy and secure installation using the vehicle's seat belt or LATCH system. This technology minimizes the risk of installation errors, which are common with other car seats.

Other notable characteristics include multiple recline positions for added comfort during long journeys and a 5-point harness system that ensures a secure fit for children of different sizes. The Roundabout is also known for its durable construction, which contributes to its longevity and reliability.

In summary, the Britax Roundabout is a convertible car seat that stands out due to its combination of safety features, user-friendly installation, and comfort. As children grow, the Roundabout adapts to their needs, making it a practical choice for parents seeking a dependable and versatile car seat for their family.
Top Page Image Contents