Britax Roundabout manual Vehicle Safety Belts, Vehicle Buckle Positions, Vehicle Seating Positions

Page 7

Vehicle Compatibility

Vehicle Safety Belts

NOTE: The information in this section only applies to installation with vehicle safety belts.

IMPORTANT: Vehicle seats and safety belts differ from vehicle to vehicle. Refer to your vehicle owner’s manual for specific information about vehicle safety belts and their use with child seats. Some vehicles have no seating positions which are compatible with this child seat or any other child seat. If in doubt, contact the vehicle manufacturer for assistance.

This child seat can fit securely in most vehicles using existing vehicle belts. However, some vehicle designs prevent a secure fit of the child seat. The vehicle owner’s manual will have information on the types of vehicle belts in your vehicle. If your belt type is listed below, select another seating position or use Lower Anchors and Tethers for CHildren (LATCH).

WARNING! The following types of vehicle belts are not compatible with this

child seat:

•

Front vehicle belts with top or bottom anchorage

 

 

points in the door. (Fig. A & B)

A

•

Motor-driven, automatic vehicle belts. (Fig. B)

•Lap-shoulder belts that have separate retractors for shoulder section and lap section in which lap section retractor does not lock.

•Non-locking, two-point Emergency Locking

Retractor (ELR) vehicle belts.

• Lap-shoulder ELR vehicle belts without use of the

lock-off.B

NOTE: Refer to your vehicle owner’s manual to determine the kind of retractors used in your vehicle and how to operate them.

Vehicle Compatibility

Vehicle Buckle Positions

WARNING! The position of the vehicle belt buckle can adversely affect the

stability of the child seat.

If the buckle lies near the position marked wrong ( ) when the vehicle belt is tightened, try fitting the child seat in another seating position in the vehicle OR consult your vehicle owner’s manual to see if you can lower the vehicle buckle position by twisting the vehicle buckle stalk.

If it is not possible to achieve the correct position ( ) for the buckle, then another seating position MUST be used.

Vehicle Seating Positions

WARNING! Forward-facing vehicle seats MUST be used with this child seat. Side-facing or rear-facing seats

CANNOT be used. See diagram below.

DO NOT place a child seat rear-facing in the front seat of a vehicle with a passenger air bag unless deactivated. DEATH or SERIOUS INJURY can occur. See your vehicle owner's manual for child seat installation instruc- tions. The back seat is the safest place for children under 12.

10

11

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Roundabout Table of Contents Page Certification Important NotesRegistration Do not use the child seat forward-facing if Important Harness AdjustmentsForward-Facing Rear-FacingChild Seat Features Vehicle Seating Positions Vehicle Safety BeltsCannot be used. See diagram below Vehicle Buckle PositionsRemoval Latch Installationfirst rear-facing belt slot Fig. C Lap-Shoulder Belt InstallationPerform as intended Then close the lock-off arm Fig. E and replace the cover Lap-Belt InstallationFacing on vehicle seat Seat while removing slack from the vehicle beltSlots. See Red release button on the Latch connectorPounds Disconnect the Versa-Tetherfrom the tether anchorLock-off upward until secured Fig. E Lap-Belt Installation Forward-Facing Installation Aircraft InstallationSafety Information Rear-Facing InstallationSecure the child seat by a seat-belt or Using the Versa-TetherTether Connector Strap With the Latch connectorsEnergy-Absorbing Tether Switching the Latch ConnectorsChild seat is necessary Harness Buckle Storing the Latch ConnectorsRecline Adjustment Chest ClipSecuring Your Child How to Adjust Harness Slot HeightChild Seat Cover Removal Sponge Clean using warm water and mild soapFully recline the child seat Cleaning the Harness BuckleHarness Buckle Removal Re-threading the Harness BuckleWarranty Double Check Child-to-Car Seat Installation Double Check Car Seat-to-Vehicle Installation

Roundabout specifications

The Britax Roundabout is a well-regarded convertible car seat that exemplifies safety, comfort, and convenience for parents and children alike. Designed to accommodate children from approximately 5 to 65 pounds, it provides a versatile seating solution suitable for infants and toddlers as they grow.

One of the standout features of the Britax Roundabout is its dual mode functionality, allowing it to function as both a rear-facing and forward-facing car seat. This flexibility enables parents to keep their child in the safer rear-facing position for as long as possible, which is highly recommended by safety experts. The Roundabout easily transitions to forward-facing once the child surpasses the appropriate weight and height limits, making it a long-lasting investment.

Safety is paramount with the Britax Roundabout, which is equipped with innovative technologies designed to enhance protection during a collision. The seat incorporates Britax's SafeCell Impact Protection system, featuring a base that compresses to reduce the impact of a crash and protect the child’s head, neck, and spine. Additionally, the seat comes with side impact protection, which provides extra security in the event of a side collision.

Comfort is also a key aspect of the Roundabout's design. The seat features plush, padded fabric to ensure a cozy ride for your little one. The seat cover is also easy to remove and machine washable, providing convenience for parents when it comes to cleaning up spills and messes.

Installation of the Britax Roundabout is designed to be straightforward and user-friendly. It is equipped with the ClickTight Installation System, which allows for easy and secure installation using the vehicle's seat belt or LATCH system. This technology minimizes the risk of installation errors, which are common with other car seats.

Other notable characteristics include multiple recline positions for added comfort during long journeys and a 5-point harness system that ensures a secure fit for children of different sizes. The Roundabout is also known for its durable construction, which contributes to its longevity and reliability.

In summary, the Britax Roundabout is a convertible car seat that stands out due to its combination of safety features, user-friendly installation, and comfort. As children grow, the Roundabout adapts to their needs, making it a practical choice for parents seeking a dependable and versatile car seat for their family.
Top Page Image Contents