Britax Regent manual Front of the child seat, Unfastening until a Positive

Page 20

Care and Maintenance

Buckle Removal

1

Locate the metal buckle strap

 

 

 

 

retainer on the bottom of the child

 

 

 

 

seat.

 

 

 

2

Pull retainer away from child seat

A

 

to loosen.

3

Turn the retainer so that the short

 

side will go through the slot in the child seat shell (Fig. A).

4

Push the retainer through slots in the shell and cover, to the

 

front of the child seat.

 

 

 

Rethreading the Buckle

1Locate the necessary buckle slot.

2Turn the buckle retainer so that the short side will fit through the slot in the cover and child seat shell (Fig. A).

3Push the retainer through the slots in the cover and shell to the bottom of the child seat.

4Pull buckle away from the child seat until tight, then verify that the strap is not twisted and the release button is facing out.

5Verify that the buckle retainer lies flat against the the child seat shell.

Care and Maintenance

Cleaning the Buckle

If your child eats and drinks while in the child seat, you may need to check the buckle periodically and wash out any accumulated debris or dried liquids. s THOROUGHLY RINSE, using warm

water (Fig. B).

s SOAK, overnight if possible, using warm B water to loosen hardened drinks or food.

s TEST THE BUCKLE, by

fastening

and

unfastening until a

positive

click is

heard after inserting the second buckle

tongue (Fig. C). If click is not

heard,

repeat cleaning procedure.

 

s TOWEL DRY

C

DO NOT:

s Lubricate

 

s Use solvents

 

s Use soap or household detergents

 

36

37

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Page Table of Contents Never route the vehicle belt over the child Registration Safety InformationCertification Forward-Facing Child Seat Features Vehicle Safety Belts Cannot be used. See diagram belowVehicle Seating Positions Vehicle CompatibilityVehicle Latch anchor limit Installation for Children 22 40 lbsLatch Long Route Lap-Shoulder Belt Long Route Lap Belt Long Route To the front of the child seat shellInstallation for Children 40 80 lbs Latch Short RouteNear the vehicle buckle Fig. C Short route configuration Fig. aReach through the belt slots to access the loop ends Latch connector strap Fig. GAttach the Versa-Tetherhook to the vehicle’s designated Pages 26Lap-Shoulder Belt Short Route Seat Fig. B26 27.D Lap Belt Short RouteSeat Fig. C Using the Versa-Tether Versa-TetherUsing the Chest Clip Using the Recline BarUsing Child Seat Features Belt Routing with the Recline BarMiddle button Move the harness straps to the side Securing Your ChildUnfasten the buckle by pressing down on Harness Height Adjustment Adjusting Buckle PositionCare and Maintenance Cover RemovalFront of the child seat Unfastening until a PositiveHeard after inserting the second buckle Lubricate Use solvents Use soap or household detergentsWarranty Limited ONE-YEAR Warranty
Top Page Image Contents