Britax 70 manual Rear-Facing Tether Connector Strap

Child Seat Functions

OR

OR

Rear-Facing Rear-Facing Forward-Facing

Rear-Facing Tether Connector Strap

Because every vehicle model is different, a location to anchor the tether for rear-facing installations may vary. Use the rear-facing tether connector strap to assist in creating an anchor point.

1Find a fixed location in the vehicle that is bolted to the floor.

* If you cannot find a location to create an

anchor point, contact the vehicle manufacturer to identify a tether connection point.

2Route the strap through the anchor point.

3Thread the metal D-ring through the loop on the end of the strap.

4Pull the metal D-ring through until the strap is tight.

5 Use the D-ring as an attachment point for the tether.

NOTE: Store the tether connector strap in the tether pouch when not in use.

25